Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Questions RE: grain fillers

Posts

Questions RE: grain fillers

#1

Questions RE: grain fillers

Mike Jones

>I was given some mohagany and have some pretty nice lidded boxes made. After several caots of Deft sanding sealer, I can see that I am up against a recurring problem when working with very open-grain wood.

I have heard of hand rubbing with pumice to fill grain...but wonder if you have some other suggestions???

Re: Questions RE: grain fillers

#2

JL

Re:Sawdust...

JL

>Per the suggestion of Russ, I used some mahogany sawdust as my mahogany filler. I was doing an oil finish and it worked quite nicely.

Re: Questions RE: grain fillers

#3

Not To Crack Wise But

Mark Mandell - Gone Round In Jersey

>Use a real grain filler. I use Crystalac clear filler for a "piano" finish on open-grained woods. Easy to use, and does a far better job than using finish or other "stuff." Becomes transparent under the finish. you can also tint it to contract with the wood (like liming wax) if you choose.

mm

Re: Questions RE: grain fillers

#4

Re: Questions RE: grain fillers

Jim Miles-Charlotte, NC

>On most open grain woods, I put Linseed oil on it when I am at about 220 grit sanding it, then sand it with the oil on it, the slurry will fill grain, small cracks and imperfections, most finishs do fine over it, however by the time you use a couple more grits most of the oil is gone.