Bleached and Blasted 5250
Bruce Forrest
>This is an ash hollow form which has been bleached and sandblasted. About 10 1/2 inches tall. All comments welcome.
Knowledge You Can Build On — Est. 1998
Bleached and Blasted 5250
Bruce Forrest
>This is an ash hollow form which has been bleached and sandblasted. About 10 1/2 inches tall. All comments welcome.
How do you sand blast them?
steve antonucci
>I like the teardrops much much better. This seems kind of "plain" compared to your other work. Just my first impression when I saw it...
A question:
Do you have your own rig or do you go somewhere and rent by the hour/piece? I haven't tried it yet, because I hear that breathing the dust is REALLY BAD for you (vs. all the other things I do in the shop that are only a little bit bad...)
I've debated getting a little canister for the compressor, but I don't know anything about it...
Steve
Re: How do you sand blast them?
Barry Elder
>Unique wood art! Keep some gloves around for handling. Good counterpoint to your other work I've seen here.
Re: How do you sand blast them?
Bruce Forrest
>It quickly became apparent that if it was to be any more than a summertime activity that I would need some equipment. I bought a floor model sandblast cabinet(around $200 at Princess Auto) and put it together. I already had a nominal 4hp 14 gallon compressor, and it is the absolute minimum I'd recommend. Even with it, it's blast for a minute or so and then wait for the compressor to catch up. Not a problem if you don't do it a lot, but if you do, then you need a behemoth of a compressor (60-80 gallon) type which will run you in the neighbourhood of $1K. The cabinet keeps my lungs intact and if I noticed any leakage, I could always put on the Triton that I use for sanding at the lathe.
The turning is kind of plain, but I like to think of it as skeletal.
Re: How do you sand blast them?
Carole Valentine
>Nice, Bruce. I wonder what this would look like dyed black with liming wax. Ash has such a distinctive grain. George Van sent me some roughed out ash bowls and I am keeping them for the day that I have a sandblaster!
Re: Bleached and Blasted 5250
Darrell Feltmate
>Very nice. Ash is a versatile wood for treatment after turning. I have a couple of pieces that I have dyed with mahogany dye after turning and they look like rosewood.
What blasting medium do you use?
James McClure
>
Or is it media?
James McClure
>
Actually, the particles are kinda small.
Bruce Forrest
>Seriously, right now I'm using something called Ecoglass, made from recycled glass that I got on sale at Princess Auto.
Carole:
Bruce Forrest
>Hi Carole, I posted a beaded ash bowl here a while ago. Just search the number 5245 and it'll come up. Not sandblasted, but an ash bowl dyed yellow with black wax. Reverse the color scheme and you'll get a good idea of what the white wax on black looks like on a bowl.
Bruce
Re: Carole- you can achieve a very.....
Jamie Donaldson
>...similar effect with a round wire brush (with thin wire)chucked in a drill. I have used several with brass and even nylon over the years, and don't have all the equipment and safety demands of sand blasting.