Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

diamond hones

Posts

diamond hones

#1

diamond hones

Claudia Hayward

>All this talk about sharpening skews and honing made me wonder - what is the life expectency of a diamond hone? And what is the life expectancy of a T shape diamond dressing stick? I tossed my dressing stick after about 3 years because it didn't seem to do the job but the new one really isn't all that much better. And as I hone my skew I wonder about my diamond hone....

Thanks for the comments.

Re: diamond hones

#2

Re: diamond hones

john lucas

>I agree. I only get a couple of years out of the DMT and EZ-Lap diamond hones. I use the T diamond wheel dresser only to clean the wheels so It has lasted me quite a while. I true the wheels with a single point diamond hone.

Re: diamond hones

#3

Re: diamond hones

Barry Elder

>I have been using my DMT hones for 3 or 4 years and the DMT people told me that the more I clean them, the longer they will last.

Re: diamond hones

#4

Re: diamond hones

Barry Irby

>OK, so how do you clean them?

Re: diamond hones

#5

Re: diamond hones

Brian Hahn in SW Wisconsin

>I use soap and water with a fine bristle brush like and old tooth brush.

Re: diamond hones

#6

Re: diamond hones

Dave Peebles Lyons, Ohio!

>Barry,

Just forget they are in your pocket when you wash your jeans. They come out of the washer like new. :)

Dave

Re: diamond hones

#7

Re: diamond hones

The MountainMan

>Hey John!

Have you ever used or heard any fwwdback on the diamond hones in Harbour Freight??

Regards

The MountainMan

Re: diamond hones

#8

Re: diamond hones

john lucas

>No I'm not familiar with their diamond hones. I'll try to check. I get a catalog about every 3 days. At least that's how often it seems to come.

Re: diamond hones

#9

Re: diamond hones

Barry Elder

>Mfg. says use water, but I go overboard and include soap also. All that you do is float off the metal dust from the hone.

Re: diamond hones

#10

Re: diamond hones

robo hippy

>When I do clean them, I use Ajax and a plastic bristle brush. I heard that some where once a long time ago. I have had my bench stones for 13 years, and they do cut, but I would have to buy new ones to see if there is a difference. I was looking into getting diamond wheels for the grinder because I wanted ones that wouldn't wear out. I was told by a manufacturer that you don't want diamond wheels for steel, because it will clog up the wheels, but that carbide won't clog up a diamond wheel.

robo hippy

Re: diamond hones

#11

Re: diamond hones

eaglesc

>"Hey John!

Have you ever used or heard any fwwdback on the diamond hones in Harbour Freight??

Regards

The MountainMan "

I'm not not but have used the set from HF.

I prefer the ones from Lowes they are quite reasonable(much less expensive than I have seen at woodworking stores) and seem "finer" than the ones from HF.