Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

buying equipment at shows

Posts

buying equipment at shows

#1

buying equipment at shows

Steve in NC

>I am going to my fist turning symposium in Greensboro NC on Friday. I have heard that there are some deals to be had on demo lathes when the show is finished. Any truth to this rumor. Anyone had any experience purchasing at show versus on line. (I am looking to buy a PM 3520)

Re: buying equipment at shows

#2

Re: buying equipment at shows

Lan Brady

>Steve,

The vendors will have deals on lathes at the symposium, but most of the demo lathes are from the different clubs in the state. Although, I think Woodcraft will have a Jet 1642 being used. Maybe Gary will read this and give you more details.

Lan

Re: buying equipment at shows

#3

Re: buying equipment at shows

Jerry Whitaker

>The vendors at SWAT furnish the lathes for the demos and then sell them at a discounted price so they will not have to re-pack them and ship them back to their store. Once they are sold, it is the byers to get home the best way he/she can. Usually someone has a truck or they will rent a U=Haul trailer. There are some good deals to be had.

Re: buying equipment at shows

#4

Re: buying equipment at shows

Gary in Zirconia,NC

>Steve, Lan is right. There will be 7 lathes in the demo rooms. At least half of them are privately owned. Woodcraft will have a jet and 2 or 3 more lathes will be provided by vendors. They usually discount them. I bought a Oneway demo lathe at Louisville. Oneway does not discount but I saved $400 in shipping. Vega will have a demo lathe in the vendor area and there may be more there. Also, the vendors will often have show specials even if the lathe isn't there.

Re: buying equipment at shows

#5

It is best to make your ...

Ed Moore

>deal with the vendor before you get to the show. That way if you want some feature or model they can bring that one with them. And, you aren't competing to get the lathe if someone else also wants it.

For example, if you want a PM4224 instead of a PM3520, they would bring that one for the demo, and the price is set so that you know the numbers.

Good luck,

Ed

Re: buying equipment at shows

#6

Re: It is best to make your ...

Robert D. Macgregor

>If Powermatic and/or Jet are demoing at the upcoming Moncton, NB woodworking show, I'd like to know. I presume if you buy a demo unit, you'd need to be there right at the end of the show to haul it away? I'd love to have a PW 3520, but would settle for the Jet 1642EVS (for the price difference, mostly).

Also, on a vaguely related topic, when trying to track down Jet Canada, I was surprised to stumble onto the fact that Sears (in the US, but NOT Canada)sells the Jet 1642EVS, and at a competitive price, too. Go figure.

Re: buying equipment at shows

#7

Re: It is best to make your ...

Mike Brazeau

>Robert - Jet no longer market in Canada, and only the Reeves drive type and midis were available. Powermatic is available through some dealers, but they never inventory to my knowledge.