Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Finish blowback..................

Posts

Finish blowback..................

#1

Mike Stafford

Finish blowback..................

Mike Stafford

>I was given a large turning square of lacewood. I turned a box from it and due to the way the rays appear it is not the best wood for boxes as they only show on two sides. Now the end grain is quite lovely so I decided to try a turn another box that maximized the exposure of the end grain while minimizing the exposure of the side grain. The box is still on the lathe but resembles a rounded truncated cone. Anyway I was finishing the box and when I remounted the lid to the body the air trapped inside the box blew bubbles with the finish through the end grain as I pushed the lid on. I did not realize that lacewood was quite that porous. The lid is only 3/16-1/4" thick so that may have something to do with it. I have experienced bleedback with a finish but this is my first encounter with blow back!!!!

And, no, this is not an April fools joke!

Re: Finish blowback..................

#2

Re: Finish blowback..................

Ron McKinley

>Just yesterday I turned a small box from a scrap of lacewood a friend gave me. I used Watco and it's still on the lathe and haven't checked it yet today. I like to let my boxes sit overnight before I turn the tenon for final fit. Hope I don't find the same thing! ...Ron