Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Small Treasures....

Posts

Small Treasures....

#1

Small Treasures....

Wally Dickerman in Arizona

>I bought a high speed piercing tool from Binh Pho in Portland. I'm finding that piercing is kinda' fun. You need to turn sidewalls to 1/16th inch, which I usually do anyway. Like anything else new, there is a learning curve.

The largest dia. is about 5 inches and smallest about 3.5 inches. The piece on the left is maple. The small one is olive, the others are yellow birch which I received from Geo. Van Van Beynan. The piece on the right has a 5-sided rim. Comments welcome. I made a few mistakes, but hey, these are my first.

Wally


img

Re: Small Treasures....

#2

Re: Small Treasures....

Allen Neighbors

>They're all beauties, Wally! The designs for the piercing are gorgeous, too.

I like that little Olive form the most. (Love Ebony collars) I want some olive wood so bad I can taste it! ('course I want to turn it, not eat it.)

Thanks for posting these.

Re: Small Treasures....

#3

Mike Stafford

Re: Small Treasures....

Mike Stafford

>That olive HF is a real beauty, Wally. I like the others but I love the olive wood. Your piercings are very attractive. Keep up the good work. You inspire us all.

Re: Small Treasures....

#4

Gorgeous Work, beautiful wood.

Barry Irby

>

Re: Small Treasures....

#5

Re: Small Treasures....

Norm Smith in Nova Scotia

>Geeezzz Wally, I don`t see any mistakes. Nice stuff. I prefer the olive wood also, although the maple is a close second but all are beautiful.

Norm

Re: Small Treasures....

#6

Re: Small Treasures....

Randy G

>Wally,

Those are great, I really like the design on the maple one.

Re: Small Treasures....

#7

Re: Small Treasures....

Don in Central Illinois

>Beautiful, all. Question, how do you get a 5 sided lip?

Re: Small Treasures....

#8

Steven Antonucci

Pierced giraffes?

steve antonucci

>First, you started burning giraffe prints. Now you're piercing them. I'm guessing dying or inlay is next ... :-)

Pretty impressive all around no matter how you look at it. I like the one on the left best.

Steven

Re: Small Treasures....

#9

Re: Small Treasures....

Carole Valentine

>Wally, those are beautiful!!! Sure doesn't seem that there was much of a learning curve for you. Do you use a laser, or do you just go by feel and so sound and measuring when you turn to 1/16"? I will never get to that point I'm afraid. Sigh....but I'm being stubborn and I refuse to use a laser until I have learned to do it consistently by hand.

Re: Small Treasures....

#10

Re: Small Treasures....

Wally Dickerman in Arizona

>With a 5-sided tool....Actually, when turning the lip I leave enough wood for some carving. The sides don't have to be even to look good.

Wally

Re: Small Treasures....

#11

Re: Pierced giraffes?

Wally Dickerman in Arizona

>Don't know what's next Steve. Actually I've done some dying and a bit of inlaying. I do a segnemnted piece once in a while...too much cutting, gluing, etc. for me. Carving requires a skill that I don't think I have, but I'm going to give it a try some day. An excuse to buy more equipmnent?

Wally

Re: Small Treasures....

#12

Re: Small Treasures....

Cyril Griesbach

>Outstanding, Wally. Simply outstanding.

Re: Small Treasures....

#13

Re: Small Treasures....

Wally Dickerman in Arizona

>Thanks Carole...I don't own a laser and don't plan to. I became fascinated with thin wall turning years ago when watching Del Stubbs turn his wonderful thin pieces. I think that it requires experience and knowing that you'll have a failure once in a while. Fear of failure holds a lot of people back when trying new things. I know the sound I hear just before going through the side. (You know, when the inside gets larger than the outside). I have some good calipers and use them a lot during the final stages of cutting thin.

Piercing, pyrography, etc. requires a steady hand. Fortunatly. for an old guy, I still have one.

When I'm teaching classes I explain that thin walled turning is not a requirment to become a good turner. I'ts just what I like to do.

Wally

Re: Small Treasures....

#14

Simply put...

keith zimmerman, Normal IL

>Outstanding Wally. That olivewood is absolutely gorgeous. I love the horizontal grain. What variety is it? All the other pieces are really outstanding too. Each element works well with the design of the form. IMO, you've made the transition from large to small rather seamlessly.

Can't wait to see more.

keithz

Re: Small Treasures....

#15

Re: Small Treasures....

Carole Valentine

>Don, the five-sided tool is hidden in the same place his beading tool is. :))

Re: Small Treasures....

#16

Re: Small Treasures....

Dale Cook

>Awesome Wally, there all beautiful. Very inspiring!

Re: Small Treasures....

#17

I like them all!

Gil Jones on Lake Seminole GA

>

Re: Small Treasures....

#18

Re: Small Treasures....

George Van

>As I said earlier, You sure know how to make that spalted yellow birch look good! The piercing is very pleasing with the spalt as it seems to make a negative space mimicking the spalt patterns.

Re: Small Treasures....

#19

Re: Small Treasures....

Jennifer@Indy.USA

>Wally, these are wonderful! I love them all.

Jen

Re: Small Treasures....

#20

Re: Small Treasures....

charlie belden

>Nice shapes turned nicely.

Thin walls.

Very interesting figure in the wood, exploited nicely.

Piercing in two of the pieces follow the grain "contours", I assume in areas where the grain figure wasn't as interesting.

Piercing looks random and natural, with fairly uniform spaces between them.

Nice finish that doesn't make the pieces look like glazed ceramics - or glass - showing off the figure nicely (and probably feels like nice smooth wood).

VERY NICE!

charlie b