Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Square Bowl

Posts

Square Bowl

#1

Square Bowl

Colin Spencer

>his bowl is the result of my first foray back to turning after a 7 month lay-off.

I was recently given a large plank of a mahogany type wood. It was very old and very dry. There was virtually no interlocking grain and so it was a dream to turn particularly after my lay off. It is 10" in diameter just over 2" high and 3/16" thick. Finished with wax and buffed.

I am reasonably happy with it after my time away from the lathe. I would like comments both on the bowl and photography as this is my first woodturning photo with a DSLR.


img

Re: Square Bowl

#2

Re: Square Bowl

Rick Allen

>Nice bowl! You still have it!

We usually try to have as much of the object in focus as possible. For posting the picture on the web this can be helped by two actions.

Croping and an increase in F stop.

Re: Square Bowl

#3

Re: Square Bowl

john lucas

>The bowl looks extremely well done. The edges are clean and the thickness seems to be consistent. It has a nice gently curve.

On the photography the focus is off. It looks like the camera focused on the back edge. Ideally you need to focus about 1/3 of the way through the piece. Then hopefully the depth of field will keep the rest of the bowl in focus.

The lighting also appears a little to flat. Some shadow is a good thing. It gives the piece more 3 dimensionality.

Re: Square Bowl

#4

Re: Square Bowl

Allen Neighbors

>Beautiful bowl! Well done, beautiful curve.

Photography probs you've already read about.

Thanks for posting.

Re: Square Bowl

#5

Re: In addition to John's ...

Jamie Donaldson

>...comments it really helps to be able to focus manually, rather than rely completely on AUTO. I would say this image is underexposed by a full f stop, and some more light would allow shooting on manual at a smaller f stop, or setting exposure compensation at +1 if you can. A slightly higher camera position would also reveal a bit more of the interior without loosing the profile view. The turning looks great to me- another square turner!

Re: Square Bowl

#6

Steven Antonucci

Agree with photo comments

steve antonucci

>I read the other comments and I agree. Smaller aperture = large depth of field. In this item, you only need about 10" DOF, so it should be pretty easy to attain.

Some cameras have a two part shooting system. You partially depressed the shutter button and they zoom to focus. If you place a soda can in the image where you wanted to focus, depressed and held, and then removed the can, you could play with the DOF, aperture, and other photo-intrinsic qualities pretty easily.

Steven

Re: Square Bowl

#7

Re: In addition to John's ...

john lucas

>I was going to mention the height but forgot. The front corner almost touches the back of the vessel. A little higher would have added more depth to the piece and would also show off the square nature of the bowl better.

Re: Square Bowl

#8

Re: Square Bowl

Cyril Griesbach

>I'm not qualified to comment on the photo but I will on the bowl. Beautiful!

Re: Square Bowl

#9

Re: Square Bowl

Colin Spencer

>Thanks everyone for the comments.

Unfortunately I can't re-shoot it as it has already left for its new home. It was shot in aperture priority mode RAW file with manual focus so it seems as though I have a fair bit to learn about this DSLR bit :). I tried a higher shot but didn't like it so maybe I needed to rotate the bowl a bit more. The colour both here and on WOW has come out much darker than on my calibrated monitor so that maybe the resizing, I have attached a copy of this photo lightened even more so hopefully more detail is now visible.


img

Re: Square Bowl

#10

Re: Square Bowl

Colin Spencer

>I have just seen the photo here after the re=post it doesn't look any different even though I seriously upped the brightness until the background was a very light grey colour. Not sure what is going on here.

Re: Square Bowl

#11

Re: Square Bowl

Colin Spencer

>Try this one I blew the background up to nearly white.


img

Re: Square Bowl

#12

Re: Square Bowl

john lucas

>Obviously everyone's monitor is different. Most of the time the photos I post at work on my calibrated monitor match pretty closely my monitor at home as cheap as it is. It's hard to tell for sure but The last photo looks pretty close to what I imagine that wood looks. The background is a light gray on my monitor.

Focusing the new digital slr's is interesting. The focus screen isn't as bright as the old slr's. I'm not sure why but I have both at work and it's remarkably easier to focus the non digital. Here's what I do. I can't focus well with my glasses on. My camera has an adustable diopter. I adjust the diopter so that the lines and letters inside the camera look sharp. Then I focus on something fairly close as best I can. Then I refocus the diopter on the subject not the lines and numbers. I'm not sure why this works better than adjusting the diopter on the lines and letters inside the finder but it does. I kept noticing focus errors on close up photos. I would focus on the front of a ring and when enlarged I could see that the focus was a few millimeters behind where I know I focused.

Using large f stops helps in this case but by far the best method is to focus accuately on on the point that will help with the depth of field. For those who haven't heard this, the depth of field increases aproximately 1/3 in front of and 2/3's behind the point of focus as you stop the lens down. That's why we recommend focusing 1/3 of the way through the piece. For camera's that don't have manual focus but do have focus lock. Take a piece of paper with a big black x on it and put it 1/3 of the way through the piece. Then press the shutter button part of the way down so it focus's. Remove the paper and finish pushing the button down to take the photo. Not convenient at all but student's in my classes have good luck doing this.

Re: Square Bowl

#13

Colin- I have noticed some .......

Jamie Donaldson

>... occasional shifts in both color and density when uploading images to the web, but seldom a change as radical as this one. Are you sure of the accuracy of your monitor gamma calibration? As an old color printer I found that I could eyeball calibration much more accurately than my Pantone Color Vision, and I keep mine matched to my Epson2200 printer output.

Re: Square Bowl

#14

Re: Jamie, when did you learn Greek?

Allen Neighbors

>

Re: Square Bowl

#15

Thanks Jamie and John

Colin Spencer

>Thanks, I will try what you have both suggested. I may well go back to a Canon lens rather than the Sigma that I used for this photo as I think that it is a bit brighter in the viewfinder than the Sigma. With the weather we are due here this weekend it should give me plenty of time in the shop.

Re: Square Bowl

#16

Re: Square Bowl

BQ in VT

>How did you turn the bowl? I have been trying to turn that type of bowl, but I cannot get the wall thickness consistent.They end up thicker at the bottom of the arc than at the corners. Also, how do you center the blank? I also have problems with the thickness of the corners varying. Very nice bowl by the way. Any help in this matter would be appreciated.