Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

3M Airstream noise level?

Posts

3M Airstream noise level?

#1

3M Airstream noise level?

Tony

>I'm thinking of getting an Airstream, and was wondering what the noise level of the fan is? I've searched all around the net for a week but didn't find what I was looking for. I know in Bill Grumbine's DVD's it seems a little loud, then again his mike was a foot and a half away and probably turned up.

Thanks.

Re: 3M Airstream noise level?

#2

Re: 3M Airstream noise level?

Fog Tanner

>I just got through using mine and the battery in on charge now. I have a Powervisor which is the same thing as the Trend and it is a little louder to me. The Airstream really isn't that bad, I can still her my Beatles and Beach Boys and the rest of my Rock n Roll, just have to turn the volume up a little more.

I can hear the wood talking when I am cutting, so if I get some vibration or any of the other noises I can hear them with no problem. If you are concerned, there are some earmuffs available, and somewhere I saw an add for an ear muff type radio. But, I use mine for up to 12hrs at a time and don't have any problems with the noise. After a while you really don't notice it running. But, what little noise you do notice, it is better than the sound of you lungs hacking away...My only regret was not getting one five years earlier instead of the Powervisor.

Re: 3M Airstream noise level?

#3

Re: 3M Airstream noise level?

George Van

>I have to agree with Fog. I do not think about the weight or noise. I like the fact that the air is clean and ny glasses do not fog up.

Re: 3M Airstream noise level?

#4

Re: 3M Airstream noise level?

Bill Grumbine (Kutztown PA)

>Hi Tony

I think you are right about the sound level in the DVD, that it is influenced by the proximity of the microphone. The overall sound of the fan running takes a little getting used to, but is not loud or uncomfortable at all.

I usually listen to bluegrass in the shop, with occasional breaks for classic rock while I am turning. I can hear them with no trouble. If I am finishing and don't have the helmet on, I will switch to classical or sometimes jazz. They don't do so well with the helmet on. But I can hear people talk next to me, and a lot of times I can at least hear that someone spoke to me from a crowd at a demo, if not hear what they said specifically.

I also have the ear muffs for when I am sanding with power or using the air compressor. They change the sound to more of a bone induction thing, but it is not hard to get used to that either.

Bill

Re: 3M Airstream noise level?

#5

Re: 3M Airstream noise level?

Doug Black

>AS200 and AS400 Less than 80 Dba excluding external noise.