>I have the one that's not variable speed. I notice that if I pull on the spindle ,away from the headstock along the axis of the spindle, that it moves about a quarter of an inch. It springs right back, and I don't have any problems while turning . But is this normal?
>Eliot You need to tighten the handwheel. Loosen the set screw and then screw the handwheel in until you don't have any play on the spindle. I tighten them until the spindle is binding slightly and then back of slightly.
>The Jet handwheel and tailstock handwheel frequently come loose. I install an extra set screw in the lathes I work on at 90 degrees to the other one. This solves this problem.