Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

time to take a break

Posts

time to take a break

#1

time to take a break

john lucas

>I'm production turning mirrors today. I'm behind on getting these out but my real job thinks I should work for them. So far I've glued one mirror to the chuck. Glued a paper towel to my finger(along with the heat from drying CA), burned my finger while sanding and dropped a scraper edge down on the bed putting a dent that required quite a bit of grinding to get the edge back. Other than that it's been a productive morning. I hope to get a dozen bodies and as many handles as I can finish today. Unfortunately I have to do a group shot at 4 which will wipe out about an hour and half of the day. Well, lunch is over, back to work.

Re: time to take a break

#2

Re: time to take a break

RonZ

>LOL, I'm taking a dinner break and had a similar day. The only thing is that is a usual day for me, especially with things dropping in hard to reach places and the back ain't what it used to be. I do try to find other things to do while I'm there though.

I was told that the difference between beginners and pros is that the pros know how to cover up their mistakes better.

Re: time to take a break

#3

Re: time to take a break

Paul Zerjay

>I'm taking the rest of the day off. All I have done all day is break things. Glad to here I'm not the only one.

Re: time to take a break

#4

That sounds better

Terry Quiram, Roanoke Illinois

>than painting all day, which is what I have been doing.

Terry

Re: time to take a break

#5

Re: time to take a break

Doug Thompson near Cleveland

>It sounds like a rough day so far... a break will increase your production. You'll return refreshed and ready to go.

I set a timer for 3 hours and quit no matter what's going on.

Re: time to take a break

#6

Re: time to take a break

john lucas

>Doug I did manage to get 11 of them turned today. I had to stop and mow the rest of the yard and do the group photo. That gave me the rest needed to finish those off. Now I have to get the house cleaned and shop organized for tomorrows club meeting.

Re: time to take a break

#7

Must be the ions

Ron McKinley

>are rotating counter-clockwise today. Everything I touched turned brown!

Re: time to take a break

#8

Re: time to take a break

JohnKJordan in East TN

>>...dropped a scraper edge down on the bed putting...

I hate it when I do that. I put rubber mats on the floor but so far nothing has come of my invention of the rubber lathe bed.

Be sure to post some pictures. I highly enjoyed your mirror-turning demo in Knoxville a few years ago.

JKJ

Re: time to take a break

#9

Re: time to take a break

keith zimmerman, Normal IL

>My day consisted of finishing up three bowls and vessels I have had in the works, figuring out how to use the Beall tap, and testing out my Fein Turbo II dust collection.

keithz

Re: time to take a break

#10

Re: time to take a break

RonZ

>The grass is always greener....but its just as hard to mow. Don't get me wrong, I love woodturning and I'm blessed to be able to do that for a living. Its just not so fun when you have production demands and everything is not going smooth.