Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Uses for a Cone center

Posts

Uses for a Cone center

#1

Uses for a Cone center

Carole Valentine

>What do you all use that big cone center for that comes with the Oneway live center set? I know it must be good for something...I just don't know what yet.

Re: Uses for a Cone center

#2

Re: Uses for a Cone center

Barry Irby

>I just used mine to help true or center a hollow form in the vacuum chuck. I put the drum chuck on the head stock and the cone on the TS with the large end toward the Headstock. I used it to gently press the HF into the chuck. It held it until the vacuum kick in and centered it. Not sure it was essential or even important, but that live center was expensive and I HAD to use that cone for something.

Re: Uses for a Cone center

#3

Re: Uses for a Cone center

Carole Valentine

>Well, I don't have a vacuum chuck so, maybe someone will come up with another use. That thing must add $35 to the cost of that center set! LOL

Re: Uses for a Cone center

#4

Re: Uses for a Cone center

Bruce Forrest

>The cone is reversible. ie can be used with either small or large end towards the headstock. Mostly I use it for remounting hollow forms, vases etc and finish turning them. I find it invaluable.

Re: Uses for a Cone center

#5

Re: Uses for a Cone center

Bill Howatt

>I use it when making end-grain "wine glasses", or other open objects that need support. I hollow the bowl part then bring up the tailstock with the cone and insert it into the bowl until it just provides some support. I can then work on the stem or whatever without any whipping.

Handy tip is to put a suitable-size cheap plastic funnel with the sharp end cut off over the cone. These keeps black aluminum oxide from being transferred to the wood.

Bill

Re: Uses for a Cone center

#6

Re: Uses for a Cone center

john lucas

>Carol I've used it to center spindles with large predrilled holes. I also had to re-turn some defects from a damaged hollow form. I was able to use this center in the open end to center it up. I turned a rebate in a waste block for the bottom of the form.

Re: Uses for a Cone center

#7

Re: Uses for a Cone center------WebKitFormBoundary

Phil Powell------

>We've used it as a dunce cay on our gerbil.

Re: Uses for a Cone center

#8

Re: Uses for a Cone center------WebKitFormBoundary

Norm Smith in Nova Scotia

>Carol, I also use mine for things that the others mentioned. I sometimes put a tennis ball in the cone while reversed on the TS to support a vase or hollow form that already have the opening finished.

Norm

Re: Uses for a Cone center

#9

Use it for turning spheres

Brian Hahn in SW Wisconsin

>The easiest way to turn spheres is with cup centers. Use the cone as the tail stock cup center. The picture below shows an incised sphere between cup centers. My live center is a Nova, so I was able to make custom cup centers, but your Oneway cone should work. That sphere is one I made last week, I'm turning stands for the spheres tonight.


img

Re: Uses for a Cone center

#10

Re: Uses for a Cone center

gary s clarke

>I use a cone center to center rings for glue up on segmented bowls. I have a larger one that I use for larger rings. I bought the larger one from Curt Theobald. Both work well.

Re: Uses for a Cone center

#11

Re: Uses for a Cone center

Carole Valentine

>OK, now I have a few ideas. Thanks!

Re: Uses for a Cone center

#12

learned something new

Atwerz

>Brian every time I log on I learn something new. Your tool rest is turned around flat side out. I never thought to use it that way. I don't know why I do things backwards or the hard way.

Re: Uses for a Cone center

#13

I was wondering if someone would notice that.

Brian Hahn in SW Wisconsin

>

Re: Uses for a Cone center

#14

Keith Tompkins

Re: Uses for a Cone center

keith tompkins

>Carol, another use is for making thin stemmed goblets. Turn the goblet section, then use the cone to steady the opening. Then, turn a thin stem without worry. Works great.

Re: Uses for a Cone center

#15

Ric Taylor

Bruce Said What I Was Going To Say

Ric Taylor

>

Re: Uses for a Cone center

#16

Re: Uses for a Cone center

Barry Turner

>I'm sure that thing has uses in turning pepper mills. (I've never used mine either!)

Re: Uses for a Cone center

#17

Re: Uses for a Cone center

Carole Valentine

>That's the only use I have made of it, Keith. :)