Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

English White Oak Burl

Posts

English White Oak Burl

#1

English White Oak Burl

Bill Grumbine (Kutztown PA)

>Greetings all

It has been a while since I posted a picture. A couple of months ago, my tree guy called me to ask if English white oak was any good for turning. I had never turned any, and told him so, but I went on to say that I was sure that if it was not suited for turning, it would certainly burn well! So, a few hours later I and my trailer were on the way to pick up this tree. It was immense, and strained the resources of everyone involved, including a hefty Kubota tractor, getting it on my trailer. As the crew as making their last cuts in the trunk, I noticed a slight bulge at the very base of the tree.

"See that?" I said? "That's a burl."

So they went a little bit above and beyond, or is that below and beyond? They buried a chain in the dirt to get that burl for me. To make a long story a little shorter, here is the result of the first and the largest piece. I've got two smaller ones left, one for the tree guy as a thanks for his dedication to preserving beautiful wood. Without his willingness to cut it out for me, it would have been chewed up in the stump grinder.


I turned this piece from soaking wet to finished thickness all in one shot. The wood was so corrosive I had to stop halfway through and steel wool all the exposed steel surfaces of the lathe and tool rest with WD-40. I had to plow through a prodigious amount of sandpaper too, since I sanded it to finish right away. I suspected it would wrinkle, and it did - like a raisin! However, it was a very nice effect, with the exception of having to re-level the base.

After letting it dry for about a week, I finished it with one coat of Bush Oil and buffed it. Overall size is 9" deep and about 8" in diameter. Thanks for taking a look.

Oh yeah, about the rest of the tree. The wood is very pretty, and is afflicted with ring shake through and through. But it burns well!

Bill

Re: English White Oak Burl

#2

Re: English White Oak Burl

Cyril Griesbach

>Bill, that's a very nice piece and I think that the color change sets it off well. I turned a small cherry burl from start to finish once and it, too wrinkled but I really liked the texture it produced. And one other thing...I wish I could get that kind of help with fire wood. :)

Re: English White Oak Burl

#3

That is one beautiful piece of wood!

keith zimmerman, Normal, IL

>You have definitely done the English White Oak Burl justice. I love the contrast in the wood. Could you see contrast before finishing?

keithz

Re: English White Oak Burl

#4

Re: English White Oak Burl

Carole Valentine

>Beautiful Bill. Good thing you turned it green. From Barb's experience, the stuff is impossible once it's dry. She gave all of her White Oak Burl to some other poor unsuspecting turner. They have probably beaten themselves to death by now.

Re: English White Oak Burl

#5

Re: English White Oak Burl

Pete Kekel - Kentucky

>Beautiful wood, Bill, and a great save at the expense of a dull chain. I really love the contrast in color in addition to the burl figure. I appreciate the fact the base had to be re-turned because of the movement, but it looks like it's planted on the table top now. I don't know how much wood there was to work with, if any, but a gentle shaping to tuck some of the flat edge away could have made it appear to be a bit lighter. Again, great looking wood. I think Oak is underrated as a turning wood, especially when there is this type of figure to be had.

Re: English White Oak Burl

#6

beautiful!

robert davis

>

Re: English White Oak Burl

#7

Re: English White Oak Burl

Bill Grumbine (Kutztown PA)

>Thanks for the comments everyone!

Cyril, I have a great arrangement with my friend the tree trimmer. I haul the wood away so he doesn't have to, and on the turning end, he loves things made of wood, and he loves my work. So every now and then I give him a really nice piece, and I end up with more than I can turn.

Keith, the contrast was very pronounced and apparent immediately. It was also very unusual, since the sapwood is usually lighter than the heart. The oil just brought it out more.

Carole, now you have me scared! I have another piece of white oak that was given to me several years ago. I am sure it is as hard as a rock by now!

Pete, usually I make the bottoms on these pieces just a little smaller in proportion to the top, but this stuff was so heavy and dense it seems to demand a heavier treatment. Wait until you see the next curly cherry one finished!

Robert, thanks for the compliment!

This one went out the door as soon as I was done taking the picture. That is always a good thing. One of the folks at my demo was taken with it, so he took it with him (so to speak).

Bill

Re: English White Oak Burl

#8

Steven Antonucci

That's what I do too (LOL)!

steve antonucci

>I had a huge white oak tree slabbed years ago, and dried. It's so freaken hard that I've started giving it away as "cutting board rounds". Works beautifully, but you definitely pay the price!

Steven

P.S. Bill- whenever I see a vase this shape, I refer to it as a "Grumbine"...

Re: English White Oak Burl

#9

Outstanding!

Stokes

>