Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Cost of VS vs. 8 speed

Posts

Cost of VS vs. 8 speed

#1

Cost of VS vs. 8 speed

Stuart Johnson

>I was looking at the picture of the new Vega bowl lathe and was wondering about it being 8 speed versus VS. I changed my Nova 3K to VS and now can't see why I didn't do it immediately. Which brings me to my question. Is there any reason to come out with a new lathe limited to 8 speeds as opposed to VS other than cost? In the case of the new Vega with an anticipated cost of $1,000 for an 8 speed 3/4 HP motor what is a reasonable increase in price for say a 1 HP VS setup? I don't think there is much if any difference in price between 3/4 HP and 1 HP motors.

Re: Cost of VS vs. 8 speed

#2

Re: Cost of VS vs. 8 speed

Gordon Seto

>What is the swing? The Jet 1236, which has 12" swing only has a 3/4 HP motor; I won't think it was over powered.

Gordon

Re: Cost of VS vs. 8 speed

#3

Re: Cost of VS vs. 8 speed

Stuart Johnson

>I don't know any of the specs for the lathe. My question is more of a general question brought to mind by the new Vega. I don't know if I would be tempted but it does look like a nice small, compact lathe. But I won't buy another lathe that does not have VS.

Re: Cost of VS vs. 8 speed

#4

Re: Cost of VS vs. 8 speed

john lucas

>Randy said it was money. Changing to variable speed was going to put it too close in price to the bigger vega. It seemed to have plenty of power. Al Crandall was giving it a workout. I know variable speed is nice but I turned for a lot of years on step pulleys. The good thing about the single speed it there isn't anything to go wrong that you can't replace yourself.

Re: Cost of VS vs. 8 speed

#5

Steven Antonucci

I'd want a bigger motor too...

steve antonucci

>I upgraded my 1 HP to 1.5 HP on my Nova and it was worth every penny. I'm guessing that the new Vega will swing at least 20" from the picture, and that you'd want a much bigger motor with a big chink o' wood spinning around.

VS is nice, but 8 speed is a close second...

Steven