Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Indyfest

Posts

Indyfest

#1

Indyfest

Dave Peebles Lyons, Ohio!

>Hello everyone,

Another great time in the wonderful world known as Anderson Indiana.

It was really amazing!! Ray and Lynn are what all others should be judged by. They sure know how to throw a party. The people, the food, the setting and the turnings were all first class. I shared a ton of laughs and a few lies with some great people.

I also was privy to some new exciting equipment that you will be seeing in the next few months.

I saw some fantastic demos too. Doug Thompsons hat demo was a real eye opener for me. I think the blank that he used started out at over 60 lbs. When he weighted it right before I left, I think it was around 6 oz. I also had a chance to meet John Lucas and see his demo of the Hunter tools. He could really make them sing. I was very impressed.

I took a lot of pics, but it seems I only have a few on my card... Not sure what happened. But here is one Dougs hat turning demo. I'm not sure Ray will ever find all the shavings in the rafters. :)

Dave


img

Re: Indyfest

#2

Re: Indyfest 2

Dave Peebles Lyons, Ohio!

>Another pic of the hat turning demo. No Doug in the pic, but check out the shavings in the back ground. It looks like Keith is checking them out. :)

Dave


img

Re: Indyfest

#3

Re: Indyfest 3.. New Vega bowl lathe

Dave Peebles Lyons, Ohio!

>Just one more for tonight.

It is the new Vega bowl lathe. It is to be priced around $1000.00. It looks like a smaller version of the big Vega bowl lathe. It was great to see this smaller bowl lathe. It still has a good sized swing, sorry but I don't have all the details at hand, but it has 8 speeds from 200 to around 2500 I think. It has a 3/4 HP Moter. I believe it will be a great all around bowl lathe at a good price point. It was assembled right before the Indyfest. You could even smell the fresh paint on it. It sure looked like a winner to me.

Best wishes,

Dave


img

Re: Indyfest

#4

Oh, my...

GaryG in MD

>Just when I thought I had enough toys....

Silly me...

Going to have to look into this.

If anyone knows more, I'll be interested to hear about it. ...Gary

Re: Indyfest

#5

Re: Oh, my...

Doug Thompson near Cleveland

>Gary, a "mini" that will turn good size bowl or platter will be hard to resist. Randy still needs to get a production model done but the way he works it won't be long.

That's why you go to the Indyfest to see what's new.

Re: Indyfest

#6

Re: Oh, my...

keith zimmerman, Normal, IL

>Gary, I turned a hollow form, approximately 7 1/2" in diameter on this lathe. As Doug mentioned, the production model of this lathe should be pretty nice. I'll be posting a photo of the hollow form in the near future.

keithz

Re: Indyfest

#7

base?

GaryG in MD

>For those of us still working on starter lathes like my Jet 1236, and with no place for a permanent Powermatic installation, I can see that this is definitely going to merit attention.

Have you heard if it will be offered with an optional base, or will it be strictly BYO? ...Gary

Re: Indyfest

#8

looking forward to it...

GaryG in MD

>

Re: Indyfest

#9

Re: base?

keith zimmerman, Normal IL

>Randy from Vega indicated the lathe was a benchtop model.

keithz

Re: Indyfest

#10

aftermarket!

GaryG in MD

>OK, listen up everybody, here's an opportunity -- we are going to need a portable base for this new lathe -- heavy enough to be stable with a good-sized blank but light enough to move occasionally. Let's get on it so it's ready when the lathe is! ;-) ...Gary

Re: Indyfest

#11

Coming right up.

Ray Thompson - Middletown,IN

>

Re: Indyfest

#12

An apology and a request

Stuart Johnson

>After seeing this photo I thought this is just about the nicest new small lathe on the market. I started a new thread asking what a 1HP VS set up would do to the cost over a 3/4HP variable pulley arrangement on a new lathe. I also said I much preferred my Nova 3K now that I added VS and would probably not consider anything in the future without VS. I made a big mistake by referring to VEGA in my question. I was asking a general question not asking about or trashing the VEGA.

So far I have received three emails. One from Randy with a phone number and an offer to discuss it with me. Thank you.

Two have been to take me to task for trashing a lathe I had not seen. One made a reference to the marital status of my parents and what I could do with my Nova. I have seen the wedding photos and I don't think the lathe will fit.

I would like to apologize to Randy for any misunderstanding and I would like to request anyone sending me email messages to please use a real name and valid email address.

Stuart Johnson

Red Oak, Texas

Re: Indyfest

#13

Re: An apology and a request

tek-Brunswick, Ohio

>Stuart: You have nothing to apologize for! I read your post and I think I took it the way you meant it. I have a Nova 3000 with a variable speed and love it too. I also have a Jet 1220 that has 8 speeds. I like to turn on them both. I find the variable speed very convenient, but not indispensable. For most of us this is a hobby. If you want to use only variable speed that is your right and privilege and you have the right to ask questions about a product also. Most of the people that post here are great people. Please don't let a couple of bad e-mails ruin your view of WoodCentral. If I get cussed out for supporting your rights, so be it. I worked construction for over 35 years, there isn't too much I haven't been called already.

Tom

Re: Indyfest

#14

outrageous

GaryG in MD

>Stuart,

I agree completely with Tom. Your post was fine. That's what WC is for. It is totally outrageous for anyone to respond to you secretly in such a manner. There is no reason for you to accept anything from a person who is unwilling to put their name where their mouth is. The very fact that this person has the established the capability to send emails with a false address says volumes. As Tom says, don't let one bad apple spoil the barrel. You have every right to be upset and angry, but hopefully you'll continue to participate with the 99.9% of kind, thoughtful, helpful WC'ers.

...Gary

Re: Indyfest

#15

Re: An apology and a request

Carole Valentine

>You don't need to apologize for a darn thing, Stuart! There was absolutely nothing wrong with your post. In fact, you posed a question that many of us were probably wondering about. I know I was. You certainly were not "trashing" the new Vega.

Re: Indyfest

#16

Didn't upset me

Stuart Johnson

>I just wanted everyone to know I was not saying anything or in anyway meant anything against the Vega. As far as the other emails, if that is the worst I ever receive I'm happy. I have a very fast delete / junk button.

Re: Indyfest

#17

Re: An apology and a request

Stephen Mushinski

>When I seen the stat's on the lathe I said to myself - Underpowered! VS or pulley's did not make a difference to me but for a lathe with that size swing a 3/4 HP motor is way to small. For the price, is the lathe worth it only the buyer can give you an answer. As far as the larger Vega I seen it in action and it does the job well so there is no reason the new one would not do just as good of a job but I feel the motor might be an issue going forward.

Someone emailing you with bad word is not very nice at all. No need to apologize.

Steve