Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Threadlocker

Posts

Threadlocker

#1

Threadlocker

Tomm

>I used some Threadlocker Red made by Loctite to hold the adapter on my chuck. I just upgraded and need to change to a larger size adapter. The old one is locked on so tight I can not remove it. Is there a product that will dissolve the threadlocker? Thanks for any help you can offer.

Re: Threadlocker

#2

Re: Heat

russ Fairfield

>Heat is the only debonder I know of for the red Locktite.

Re: Threadlocker

#3

Re: Threadlocker

Bill Turpin in WNC mountains

>Loctite is usually broken loose with a propane torch. You will see a small puff of smoke or a very small ball of blue fire. Then quickly turn it out. You will need to heat to something like 500 degrees F.

CAUTION: what this will do to your chuck, I do not know! Try to heat the collar, not the whole chuck. You might want to try CA debonder first, since locktite is CA based.

Bill in WNC mountains

Re: Threadlocker

#4

Re: Threadlocker

Kevin Gerstenecker

>Russ is correct........heat is the only thing I know of to get the red Loctite to release it's death grip. For future use, anything you KNOW you will never disassemble again, the red Loctite is fine. For things you WILL want to take apart, use the blue Loctite. The red holds REAL good, as you have found!

Re: Threadlocker

#5

Re: Threadlocker

Tomm

>Thanks for the help. Heat worked well and I don't think I damaged the chuck.