Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

How did they do that?

Posts

How did they do that?

#1

How did they do that?

Randy Johnson Connersville, IN

>I got back last night from a little trip on the Appalachian Trail in Georgia and North Carolina.

I�ve done the same sections a few times before but I noticed something different this time. Before, trees with interesting burls and shape were no more than that. Now, I see them as bowls in the rough, and while I don�t necessarily want to see them cut down, I find myself wishing I would be there if they were.

On the way home I stopped in Gatlinburg overnight. I checked out some of the turnings at the Arrowmont store the next morning before starting home.

Everything they had was better than I�m capable of, but two pieces really got my attention. One bowl, and one open form had legs. I can�t for the life of me figure out how to go about making something like that. Does anyone know of an online tutorial or even a book that explains the process? It isn�t a desire to try it so much as a simple wanting to know how.

Re: How did they do that?

#2

Re: How did they do that?

Carole Valentine

>As someone once told me, turn the piece with a thick bottom then carve away everything that doesn't look like legs. :)

Re: How did they do that?

#3

Re: Randy-it's not too complicated.......

Jamie Donaldson

>... and I don't know of any resources on the internet. Just leave a ring at the base, mark out the legs and cut the waste wood between the legs away with something-I use a coping saw. The hardest part is carving and shaping the body profile between the legs to continue the profile of the piece without evidence of the wood that was removed. And lots of sanding!

Re: How did they do that?

#4

Re: Randy-it's not too complicated.......

Randy Johnson Connersville, IN

>That's the only way I could see to do it but I couldn't believe it was the method used. Particularly on the open form, the symmetry between the legs was so perfect (the general shape was like an egg on end) it looked like it HAD to be turned somehow.

Thanks

Between the Arrowmont store and a few places I looked at in Berea, KY on the way down, I got a lot more out of this trip than the time spent on the trail.

Re: How did they do that?

#5

Multi - Axis?

Jorge Castaneda

>If you want to complicate it.

Re: How did they do that?

#6

Re: How did they do that?

Robert D. Macgregor

>The woodworking channel had a show on "sneaky feet" bowls that demonstrated turning a bowl and then creating short legs by carving (power sanding, actually) away most of a thick base. I think this is usually done with three feet, since the piece will never rock on three, but, as I recall, the demo made four feet.

Re: How did they do that?

#7

Re: Randy-you drove right past me ....

Jamie Donaldson

>... in Georgetown and didn't even stop to say YO!!!

Re: How did they do that?

#8

American Woodturner, Spring 2007

Brian Hahn in SW Wisconsin

>The American Woodturner had an article on making footed bowls in the Spring 2007 issue. It should be available from the AAW, or better yet, maybe you can borrow someone's copy.