Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

carving

Posts

carving

#1

carving

john lucas

>I know many of you want to add carving to your skills. You look at what the carvers do and say that's way too hard for me. Let me assure you it's not. Sure carving quickly and cleanly with hand tools and no sandpaper clean up is well beyond most of us. However there are a lot of ways to add carving to your turnings without being that skilled.

I've done a lot of carving over the years. Mostly duplicating pieces on old furniture or clocks. My first award in woodworking was partly carved. I carved full size baby legs on a clock I called the Biological clock. I use a wood rasp, jig saw, coping saw, jewelers saw, my dremel and sandpaper glued to sticks. Was I skilled. Not really, just patient. I bought a baby doll at walmart and simply copied the legs. You should have seen the looks I got when I lifted their skirts to look at their legs. I had to buy the right ones. I'm probably on a Walmart video on how to pick out a pervert.

For years I used the Dremel with various bits to carve. You learn to carve down hill with the grain. It reduces the sanding. You pick these tips up as you go. If you really like this try using a Flex shaft machine. If you want really delicate work try one of the higher speed carving tools or even a really high speed tool like the Dental grinders. With a steady hand and patience you can do an awful lot of work. Start with shallow carvings because it takes less patience. Just find a subject and try to copy it. It might be a detail on a piece of ceramics or glass. Just have fun, take your time and see if you can add that to your turning.

It's surprising what you can do with a wood rasp. Get a good one. A cabinet makers rasp from Highland Hardware is a good place to start. You can do spirals on spindles, carve flutes in vessels and change the shape of the lips on bowls. It's fun. Plan on a lot of sanding but it goes fast if you start with coarse enough paper. You can wrap or glue sandpaper to sticks to make it easier if the shapes allow it.

To learn to use carving chisels try green wood. It's much easier to work with. don't pick piece of dry cherry or hickory as your first carving. It will frustrate you. I learned by making a Windsor chair. carving the seat gave me lots of time learn to work with the grain. Start with just one tool. A small gouge is a good choice. See what all you can do with this one tool. Then get a V tool. The V tool is the hardest for me to sharpen so read a good book on sharpening this tool. Sharpening carving tools is extremely important. It's like the first time you really got your bowl gouge sharp. There is a huge difference in how much control you have. I bought a 5 piece palm carving set from General tools. This is a cheap set but suprisingly decent in edge holding ability. I still use 3 o the tools in this set even though I have a bunch of higher quality tools.

The easiest way to learn is to copy something. Pick a piece that you think you might be able to do with the tools you have on hand. This might be a flat chisel and a wood rasp, or Dremel and sanding sticks. It doesn't matter. You can do something with almost anything in the shop if you really want to do it.

Re: carving

#3

Re: carving

tm

>Just this week I started playing with a Dremel to inlay some stones...

I'm getting inspired.

The link to Nora Hall ... masterful work & a fascinating and inspirational life.

tm

Re: carving

#4

Re: carving

RonZ

>You mentioned the key word here, patience. I'm challenged in that area. I'll tell you what I told Malcom Tibbets. I enjoy your work and I'm saving that for my retirement.

Re: carving

#5

Re: carving

john lucas

>I believe it was Nora Hall that they interviewed on Roy Underhill's show one week. I learned a whole new way to use the V gouge that week. I have a long way to go before I can call my self a carver. I get the work out but I'll bet I get a chuckle out of all the real carvers. Still it's fun to produce something and each project builds confidence.

Re: carving

#6

Steven Antonucci

Nora Hall's work profiled on Modern Masters

steve antonucci

>There's an episode of MM on DIY channel that profiled her work. They briefly touch upon her bio, but it's a lot better represented on her website.

Thanks for the link

Steven

Re: carving

#7

Re: carving

eliot d

>I don't usually print out messages from the board, but I printed out this one! Thanks. Ed Kelle (pronounced "Kelly" )showed our turning club ( actually two clubs: CAW and MCW) a nice carving (texturing) technique that works beautifully and that anyone can do the first time. He buys those cheap ( about $5 for four and a shaft) diamond covered wheels from HF and uses them in a Dremel at high speed to simulate grain. The results look as if one carefully carved thousands of long lines right next to each other, but one does it by just running the wheel along and overlapping at will.

Re: carving

#8

Re: carving

Lee Buck

>The point John makes is important. Many things others do look too difficult. I certainly have that problem. Those of us who have access to clubs and demonstrations can see that most skills involve a process that can be done by almost anyone. Certainly only the very gifted will do it well at first. I have just started carving on turned pieces. I use a burner to draw the lines, a Weecher flex shaft tool with Flexcut bits to carve, and hand tools as John mentioned as needed. The differences between my work and skilled carvers' work are obvious but my pieces aren't bad and will get better. That's the way it worked for anyone whose work we admire. Next I'm going to pick up that airbrush that's gathering dust. Thanks for all your good examples John.

Re: carving

#9

Speaking of carving, I have a question.

Clem Wixted Jonesboro, Arkansas

>What happened to the CARVING Forum. I would like to try carving and have yet to start. But, I have tried to read what I can so I will know where to begin. I used to read the CARVING Forum here but I've been out of town for 2 weeks and now I don't see the CARVING Forum.

What happened to it?

Clem

Re: carving

#10

Re: Speaking of carving, I have a question.

john lucas

>The carving forum had gotten to where it was seldom used so Ellis asked a bunch of people what they thought and the consensus was that we should drop it.

Re: carving

#11

P.S. John, that was a...

Clem Wixted Jonesboro, Arkansas

>...very good readers digest type of introduction to carving. Probably the way to start is just to start and things will begin to fall into place.

Thanks for the tutorial.

Clem

Re: carving

#12

readers digest

john lucas

>Clem Many many years ago my mother gave me a subscription to readers digest. I kept it for a couple of years and then decided to drop it. they kept sending it to me and sending me a bill. I kept sending the bill back with a notice, and then sending it back with a stern warning and then tearing it up and sending it back. They kept sending the darn things.

I took one issue out in the back yard and shot a dozen arrows into it. I took a photo of the magazine with the arrows and then sent them the photo along with the destroyed magazine and a note. The note said. Dear sirs: Pleas continue my subscription. I finally found a use for this magazine. I never got another issue.

Re: carving

#13

Re: readers digest

Clem Wixted, Jonesboro, AR

>John,

Neat story. I never knew that you were so fond of RD! :-)

Clem

Re: carving

#14

Re: readers digest

eliot d

>You're a genius! I keep getting mail from a certain mortgage company, but no matter how may times I contact them to stop, they won't quit. Perhaps I should try your method.