This is the first time I have posted shots of my shop. I designed and built a woodturning/woodworking basement shop that I have been working on since 1999. It has 600 sq ft and packed with tools, wood and turnings. I hosted the August meeting for the DelVal Turners club. You can check out the attached link to the newsletter and click on August 2007 newsletter. It was fun for my wife and I to host the meeting and squeeze in twenty people into my small shop. The above shots are with the shop empty. For scale the tall hollow forms behind the table saw are 15" high. All comments are welcome.
>I'm always amazed at what other people's shops look like. My garage, er um, studio is 2 feet from the outdoors, and yet I have more dust and custom made maple mulch on the floor than I could bag in a day.
I think some folks like cleaning more than woodworking... ;-)
>Nice looking shop Andy and these days, I most like the ducting. I gotta get me some dust collection hooked up. I really like all of the flat surfaces you have for collecting turning projects and supplies. That seems well thought out but why did you make so many of them out of iron? Sure, the tablesaw looks big enough but wouldn't it have been a lot lighter if made of plywood?
Steve Kubien
-who is glad I didn't have to move any of that stuff downstairs!
>Yes, they are to far from the lathe. I will eventually move them when I get more organized with my turning tools. I usually sharpen three gouges at one time to minimize walking back and forth. I need to make racks for my turning tools.
>The grey counter tops are actually 1 1/8" thick laminate material. They are recycled counter tops from office cubicles. The cabinets you see in the side view picture are metal shelving with this counter material mounted on the sides and hinged on for doors.
The ducts were recycled too. They are 6" ducts with flanges and clean out ports. There are a total of 14 valved ports on the dust collection system. There are three locations in the piping where I can connect a floor sweep to keep the shop clean.
I have three goofy dogs that like to track dust around the house so I try to keep the shop pretty clean and keep them out when I can.
>All I can say is I'm envious of your terrific shop. I am curious about the 6" blocks under the lathe. I'm 6' 1" and am considering the same lathe in the (distant?) future. How tall are you?
>I gave up trying to sweep up the shop yesterday and moved the truck around to the front of the house and got out the leaf blower. A word of advise if you try this way of cleaning up. Wear a dust mask. I wasn't thinking and spent the rest of the day trying to hack up a ton of dust.
The last time I tried this I didn't move the truck and we had a either a light ran or heavy dew the night before. You don't want to do that.
>this clean???????? Even if I vacuum after turning (which I rarely do), there are cobwebs with dust clinging to them (they look really pretty when the early morning sun shines on them) and there's always chips on the floor around the legs or under the tables. These pictures are depressing me because I can't see the top of my worktables, one of which is a roll-around tool chest. I have papers, calipers, bolts, screws, cordless screwdriver, a stack of unfinished salad bowls (just need the bottoms cleaned up), markers, pencils, drill bits, cut-offs for collars/finials........... wait a minute, I am organized, look how fast I listed exactly what's on the top of that table, I don't have to search for any of it!!!!!
Seriously, very nice, clean, organized, efficient shop.
>Andy I think you are fooling us. You cant be a woodturner because your shop is to clean. If my shop looked like yours my wife wnoutl have a heart attack. She is always giving me a hard time about the dust and chips.
How do you keep the chips from flying up the staires?
>Note that wiring conduit is less expensive then water pipe. Clear curtains from Walmart. The lathe is surrounded on three sides with curtains. After I rough out the piece I pull back 2 of the 3 curtains. You can see the stair rail through the curtains.
>Ruth Just like mine. right now if I have a horizontal surface it has a project on it that is in some process of finishing. I need at least 2 weeks of free time to solve all the problems and finish these projects.
There is evidence of dust on my table saw in picture 2 and clutter on my metal work bench in picture 3 :>))).
Actually I spent some time cleaning up before my August meeting and then I took the pictures. The 14 hollow forms shown in picture 2 are in various stages of completion with some problems. I use curtains in the new photos below to capture a lot of the dirt & dust. I do vacuum up once a week to keep the shop relatively clean.