Apple weed pot
WayneLeach - NW Ont
>Hi Everyone,
This little weedpot was turned from some kind of apple tree limb (maybe crabapple)?
It measures approx. 3-1/2"Dia. x 3-3/4" high
It turned very well and needed very little sanding.
It is finished with Minwax wipe-on-poly (satin)-4 coats lightly sanded with steel wool between coats , the last coat applied with 0000 steel wool while turning and then polished immediately with a cloth while still spinning. I like the finish!
Comments and suggestions welcome and appreciated.
Thanks for looking,
Wayne




