Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

lathe parts

Posts

lathe parts

#1

lathe parts

Lloyd Brown

>Well, I settled in for some nice woodturning practice today only to have my belt break on my Delta Midi lathe. My question is , will those link belts work or do I need those little ridges on the belt. I hate to think how much Delta wants for the belt, but if I must , so be it.

Re: lathe parts

#2

Re: lathe parts

Mike DeLong

>Lloyd, I had the same problem recently. IMO you need to continue to use the ribbed belt. I got mine from Delta and your fear is justified. I bought two so I would have a backup (the last one broke at a very inopportune time) -- with shipping they set me back $41.85. $15.42 for each belt plus $8 shipping and $3.01 sales tax. Way over-priced IMO. If anyone knows of a better (read cheaper) place to get them....I'm listening.

Mike

p.s., I could have saved the shipping by picking them up at a factory parts store, but that meant 4-hours of drive time which would easily have cost more than $8 in gas.

Re: lathe parts

#3

Re: lathe parts

Ed Wujciak

>Depending on how far "out-in-the-sticks" you live, check the yellow Pages under "bearings". Those sorts of places sell all kinds of power transmission parts. When I got my new Nova 1624-44, I called a local place called Kaman (I think it's a national chain), and they got me a spare in a week for $12. If you're in a hurry, you'd probably be out of luck.

Re: lathe parts

#4

Re: lathe parts

john lucas

>When I needed one for my Nova Comet I went to my local nutz-n-bolts which also sells bearings. They had a 6 ribbed belt but not 3. I bought the 6 and split it down the middle with a razor blade. That gave me 2. I think I paid about $12 for it.

Re: lathe parts

#5

Several years ago a source was given for belts and

Don henthorn

>the name began with a U. I used to have a link to that place but lost it some time ago. Does anyone remember it? Seems like they had very good prices on belts for the Jet mini as well as others.

Re: lathe parts

#6

Re: lathe parts

rthomas

>motion industries has the 6 rib one that John refered to dont rember the price but inexpensive

Re: lathe parts

#7

Re: lathe parts *LINK*

Tommy Holmes

>I saw this link on a forum recently. I did a couple of searches but can't find the post. Hope this helps


Belts For Anything

Re: lathe parts

#8

Re: lathe parts

Allen Neighbors

>Do a search on this forum, within the last two months, for 340 J3 or J3 340. There is a place, I think it's called the belt store or the belt place, where I bought the J3 240 belt for my VL100. Total price including shipping was $8.38.

I'll try to find it, too. If I do, I'll post it.

Re: lathe parts

#9

Re: Yep. beltsforanything.com

Allen Neighbors

>Call them... ask for Phyllis... she'll probably even answer the phone. Best prices around... best service, too.