Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Another Qustion on OLD Lathe

Posts

Another Qustion on OLD Lathe

#1

Another Qustion on OLD Lathe

David Churnega

>I have a old Rockwell lathe (Pittsburg produced, Maybe) with exposed pulleys on the top and bottom. Can I cross over the belts to get 16 speeds?

Any help would be appreciated.

Thanks

David from Cleveland, Ohio

Re: Another Qustion on OLD Lathe

#2

Re: Another Qustion on OLD Lathe

Doug Thompson near Cleveland

>David, good idea but the belts and pulleys would start to wear. If the motor could be hinged and slid to align the pulleys would be a better idea but tough to do.

Re: Another Qustion on OLD Lathe

#3

Re: Another Qustion on OLD Lathe

john lucas

>Most of these that I have seen, the owner added an jack shaft between the lathe and motor so they could have more speeds.