Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Redwood Lace Burl

Posts

Redwood Lace Burl

#1

Redwood Lace Burl

Barry Turner

>I just scored some very nice pieces of Redwood Lace Burl. What is the best way to finish this stuff to bring out the depth of the grain and figure? Would an application of Watco Oil before finishing with polyurethane work better than just the poly?

Re: Redwood Lace Burl

#2

Re: Redwood Lace Burl

Doug Turner

>Barry,

Redwood turns dark when you use Watco oil. Most of the gift shops in California use laquer to preserve the redish color and the contrast in grain. You might try one of the waterbased finishes with a UV inhibitor, or pretreat with a UV inhibitor.

Re: Redwood Lace Burl

#3

Re: Redwood Lace Burl

john lucas

>Barry Sand to a really fine grit. It soaks up the finish differently in different parts of the wood. A finer grit helps prevent this. I've only turned one piece so I have limited experience with this wood. I use lacquer but really don't remember how much it changed the color.

Re: Redwood Lace Burl

#4

Re: Redwood Lace Burl

Barry Turner

>I've been sanding to 400-grit.

I've made a few wine stoppers with some of the smaller pieces, but I've got a couple of bowl-size pieces, too. Maybe I can experiement with the smaller pieces before I do the larger ones.

I don't know if lacquer (Deft) would be the best choice for a wine stopper or not. I'm not so sure about Krystal Coat either.

This stuff does have some beautiful figure. It would be a shame to slop some oil finish on it that turns it so dark you can't see the grain anymore. Thanks.