Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Barbara Dill's Multi-Axis Turning Article *LINK*

Posts

Barbara Dill's Multi-Axis Turning Article *LINK*

#1

Barbara Dill's Multi-Axis Turning Article *LINK*

charlie belden

>The Fall 2007 issue of American Woodturner has a great 5 page, well illustrated, article - the first of two articles on the subject of multi-axis turning. Her statement "I have found a way to systematically conceptualize and categorize multi-axis spindle turning." seemed pretty ambitious. Then I went through the five pages. Every page produced at least one AH!

Now if you've played with multi-axis turning it's often either like magic - or a confusing and frustrating ordeal - the outcome seeming totally unpredictable - and unreproducable. With a spindle turning bias/blind spot, I was always thinking in terms of circular cross sections. It never occured to me to play with intersecting arcs - or twists.

Have done the first of what will likely be several pages on what I've learned so far thanks to Barbara's article. I look foreward to her next article on the subject.


Playing with Multi-Axis Turning per B Dill Article

Re: Barbara Dill's Multi-Axis Turning Article *LINK*

#2

Excellent job. Thanks

john lucas

>

Re: Barbara Dill's Multi-Axis Turning Article *LINK*

#3

Dick Hines

Re: Barbara Dill's Multi-Axis Turning Article

Dick Hines

>Barbara and Tom Crabb are in the Richmond Woorturners We see a lot of multi-axis turnings at the meetings. Barbara has really going big time with the multi axis turnings and you never know what Tom will bring in.