Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

natural edge bowls

Posts

natural edge bowls

#1

natural edge bowls

John Purdue

>I have never turned a bowl on a big scale, all I have is a jet VS mini lathe. I make turkey calls and it serves me well for that.

But I would like to turn a small natural edge bowl and would like to know how you guys keep the bark on and how do you finish the bark?

Sincerely,

John Purdue

Re: natural edge bowls

#2

Re: John- how much time do you have?...

Jamie Donaldson

>... That is a loaded question, and the short answer would be "work carefully and CA glue!" I'll let someone who can type faster fill in the details for you!

Re: natural edge bowls

#3

Re: John- how much time do you have?...

John Purdue

>I have all the time in the world to do this. I just want to try something different. I love doing my turkey calls but need to do something a little different.

Re: natural edge bowls

#4

Re: John- how much time do you have?...

Carole Valentine

>Best thing to do is find someone near you to demonstrate. It's too much to type. It can be scary at first until you get used to the sensation of going very rapidly from cutting wood to cutting air! There is a lot of "feel" involved. A few things that come to mind: Turn the rim to thickness first, because once you hollow the rest of the bowl, you can't go back to the rim - it will flex too much without the support. Cut into the rim towards the base - if you cut towards the rim you will knock the bark off. Use wood that was harvested in the winter when the sap wasn't running - the bark is tighter. I use the same oil on the rim as I use everywhere else. Only time I use CA is if absolutely necessary if a piece of bark has become unstable. I don't like to use it at all if it can be helped. Do a search on Google for "Turning a natural edge bowl" and you probably will find some good info. I think Bill Grumbine may have a section on his web site.

Re: natural edge bowls

#5

Re: John- I posted your info with ....

Jamie Donaldson

>... the natural edge pecan bowl just now- hope it helps get you started.

Re: natural edge bowls

#6

Re: John- I posted your info with ....

John Purdue

>Thanks for the information