Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

what would you like to turn?

Posts

Re: what would you like to turn?

#26

Keith Tompkins

Re: go for a whale.

keith tompkins

>Nope, not a whale. Better. It's already in progress, scheduled for totally turning symposium. :)

Re: what would you like to turn?

#27

Re: what would you like to turn?

john lucas

>Lan Take one of your pieces and make 10 of them. Each time try to change a little something or add something to it. It could be the shape or add a texture or new detail. By the time you get that done you'll probably have an idea for new piece.

Re: what would you like to turn?

#28

Keith Tompkins

Hey..Wait a Minute!!!

keith tompkins

>Reading through the replies here, it seems the articles in the AAW journal may not be so off the mark after all!!

Perhaps it's time to send your dues in?!

Re: what would you like to turn?

#29

Re: what would you like to turn?

Carol in Illinois

>1. Something textured.

2. A plate with a lovely textured border.

3. A hollow form. (Haven't tried that yet.)

4. A totally beautiful pen that I love so much I have to give it away but don't want to.

5. A lidded box - and I want to be able to part the lid and bottom using my parting tool. Scares the begeezus out of me when I try it.

6. In fact, I'd like to be able to actually "part off"... anything!

7. A completely smooth-from-the-gouge bowl.

8. A hollow form with one of those absolutely bee-you-tea-full finials.

9. Something dyed. I can't for the life of me figure out how to use my transtint dyes. Pathetic, ain't it?

Re: what would you like to turn?

#30

Barb Siddiqui

Re: what would you like to turn?

Barb Siddiqui

>Small platters (Jet mini) and shallow bowls with feet. I need Time....

Re: what would you like to turn?

#31

I forgot about the linen fold piece-

john lucas

>I think your right. You simply have to look around you and find something. could be a shape, could be a design, could be a texture.

I've been working on a design from a detail of a lamp post base that we have on campus.

Re: what would you like to turn?

#32

Keith Tompkins

Re: what would you like to turn?

keith tompkins

>Mike, I have watched your boxes progress for some time now...All you need to do is add that special "Stafford" signature touch...the rest will be history.

Re: what would you like to turn?

#33

Hey John, come on over to LR, you can

Keith Newton

>try something on my lathe. It is heavy and powerful enough to handle 7' diameter.

The worse thing about getting really large, is that you just absolutely can NOT make a mistake and hang a tool, or make any kind of slip. The mistakes are just extremely risky.

Initially the rpm's need to be slower until things start to get into balance, then after that, they need to be slower because if you turned fast enough to get the middle out, there may be to much centrifugal force to overcome the weakest property in wood, which is usually the tension perpendicular to the grain, so any natural split in the grain can even make it easier to blow up.

Then there is the exponential factor. If you double the diameter, the circumference also doubles, however the area quadruples, so if you also double the height, then you are looking at a eight-fold volume of wood to get out of the middle, but you may only feel comfortable to turn at half of the rpm's so now you are looking at 16 times the time factor.

Then, if you have done a good job, and have produced a great big work of art, I hope there is a bank or some kind of institution wanting a big work for an installation, because while most people love to look at these kind of things, most of them will come to their senses before they will shell out the bucks to buy a really big piece, unless you happen to be at the top of the turning food-chain.

Re: what would you like to turn?

#34

Re: what would you like to turn?

Ed Karch

>another burned Clay Foster type piece with bamboo nails

Re: what would you like to turn?

#35

I would like to turn into someone who gets

C.W.Stivison

>as many things as John does done in a week.

CW

Re: what would you like to turn?

#36

Re: what would you like to turn?

Lan Brady

>John,

That is a great idea, I will tyr it. Oh waitm now I am copying your idea?????

Thanks,, Lan

Re: what would you like to turn?

#37

30 ...again :)

Dave Peebles Lyons, Ohio!

>

Re: what would you like to turn?

#38

Re: 30 ...again :)

Jerry Whitaker

>Me too except for the fact that I would have to go back to a "real" job again.

Re: what would you like to turn?

#39

Parting tool

Jorge Castaneda

>Carol,

My favorite parting tool is a Dozuki saw for small stuff, for large pieces, I use a Ryoba. : )

With the lathe turned of, of course, I use the skew to make a starting line.

Re: what would you like to turn?

#40

You are right Jerry

Dave Peebles Lyons, Ohio!

>I had not thought of that. Thanks for making me happy again. :)

Dave

Re: what would you like to turn?

#41

Barbara, I only practice on pieces

Ruth Niles

>that are not quite good enough for the artisan gallery and I'd probably end up burning them or using them for sandpaper or such. Only trouble with that is I never finish them for that same reason.

Re: what would you like to turn?

#42

Re: Carving..... me, too

Ruth Niles

>Carole, I can draw, I still can't carve. The best carvers I've watched use stencils so they really aren't drawing per se.

When I see carved pieces I can't stop studying them, every curve and cut and keep promising myself I'm going to take carving lessons.

There is a "carver's round-up" every July where I used to live, I went one year and there were 2 guys giving classes that were awesome. I had a small bowl with me, sat down and in 20 minutes I had a beautiful leaf carved and sanded. It was primitive as far as skill and finish but it was beautiful to me.

Re: what would you like to turn?

#43

John, your first response here was

Ruth Niles

>the best. The linen fold, which is awesome, by the way, is a good example, but the fabric fold has been done before. Your first response of turn, turn, turn is what Jeff needs because he'll get so tired of turning the same thing, he'll start thinking "what if" or "maybe I could". Most of the things I do this with look ok, nothing to brag about. But I'm playing around and, although it may never happen with me, I do believe that's how a lot of the "new" or different creations are done.

It's a funny thing, I've done some of my nicest work on lousy wood. I think maybe because I wasn't worrying about ruining a good piece so it was a more relaxed turning experimentation?

Re: what would you like to turn?

#44

frustrating, isn't it, Lan! LOL!

Ruth Niles

>

Re: what would you like to turn?

#45

Re: Carving

Andi Wolfe

>Well, I can carve, but I can't draw. Try it and see what happens. . .

Re: what would you like to turn?

#46

Steven Antonucci

Try a small XActo razor saw, Jorge

steve antonucci

>I have a little craft/hobby XActo knife saw. The kerf is less than 1/64" and it cuts so cleanly and easily, there's minimal sanding.

I use it with the lathe running too, BTW. At the last 1/4", power off and finish the cut. Good up to about 3" in diameter.

Steven

Re: what would you like to turn?

#47

Re: Try a small XActo razor saw, Jorge

Jorge Castaneda

>Steve,

Thanks for the tip, sounds good, I'll look for one.