Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Chainsaw chaps

Posts

Chainsaw chaps

#1

Chainsaw chaps

HeatherA in Alaska

>Hello, I just bit the bullet and bought a new stihl 250 easystart chainsaw. I have not cut anything with it yet but it is a dream to start! I have a poulan that I could not start myself and this stihl is unbelievable. I am going to get some chaps and was wondering what to look for, esp. what type of fabric.

Thanks,

Heather

Re: Chainsaw chaps

#2

Re: Chainsaw chaps

jwoodwright

>Heather, Alaska Industrial Hardware (AIH) has Chainsaw Chaps and a Combination Ear Protectors, Face Mesh Screen and Safety Helmet. Don't forget some Gloves with Kevlar. Kick Backs still happen and all of these have material that will limit the damage...

Re: Chainsaw chaps

#3

Re: Chainsaw chaps

Barry Irby

>Good advice. I don't know much about them, but I bought mine a the dealer that sold me the Saw. I thought they were Stihl also.

By the way, buy excellent gas (higher octane) in small batches and use it promptly. Do not save it for long. Don't ask my lawnmower why I'm telling you this. (An old can of gas that got pushed back and forgotten cost me $200) I am thinking of a labeling system of some type on the gas cans. (Lawnmower/date purchased, chainsaw/date purchased, weed eater/date purchased, etc.)

Fresh gas "starts better" and is really cheap. Use it in 30 or not more than 60 days.

Re: Chainsaw chaps

#4

Re: Chainsaw chaps

don lewonczyk

>Not to do with chaps but gas mixture. Don't know 100% but a guy who owned a small engine shop and was retiring and selling his left over inventory at a yard sale told me that every 2 cycle engine should be mixed one way and forget the manufactures blend. His take since for 30 plus years was to mix 20 parts gas 1 part oil and you would never burn out or sieze your engine, might fowl it out sometimes though. I took his advise and know have 1 gas can(1gal size)with that mixture for 3 different chain saws, post hole digger and 3 weedeaters and not had a single problem other then a little extra smoke. Beats having 4 gas cans and always looking how to get rid of the stall gas.DonL

Re: Chainsaw chaps

#5

Re: Chainsaw chaps

Gary Evans Tallassee, TN

>Hi Don,

Not that your guy's advice is bad, but it's based on 30 year old technology. 20 to 1 mixtures were wise back then, but it's a waste of oil today. Mix everything at 40 to 1 with name brand oil, and you will never have a problem with crank bearings. Plus, you won't have to worry about the occasional fouled spark plug or the extra smoke. Just make sure that the mix is thoroughly mixed to start and that you shake it up well every time you use it.

Gary

Re: Chainsaw chaps

#6

Re: Chainsaw chaps

Bill Neddow

>Think about getting chain saw pants rather than chaps. I bought the chaps first. Blasted nuisance to put on with three straps behind the leg on each side. As a result, I sometimes did not take the time to do it, even though I knew I should. As a result of these guilt trips, I finally broke down and bought some pants. They go on every time I go to use a chain saw. Simple. One foot down each pant leg and you are done.

Re: Chainsaw chaps

#7

Re: Chainsaw chaps

Carole Valentine

>Heather, you will love that saw! It was the best money I have ever spent. Did you get an 18" bar for it? It has plenty of power to handle 18". The only other saw I ever had was a Craftsman that would give me a heart attack trying to start it. Two of my male neighbors have been coveting my E-Z Start ever since they tried it. LOL

There was a link to some good prices on chaps a while back but I can't find it. I remember Allen Neighbors ordered some form those folks so maybe he will chime in. I really should get some.

Re: Chainsaw chaps

#8

Re: Chainsaw chaps

Don in Central Illinois

>I remember a post earlier (this year?) that had a link to a video showing how the chaps stops the chain saw. Check in archives for chaps. If I get time later today, I'll check and advise, but with 1/3 of my staff off today, I may not get time. (When one person out of a three person office takes a day off, it get hectic.)

Re: Chainsaw chaps

#9

Video

Curtis TX

>I just bought a Sthil 280 and tried yesterday for the first time. Very Cool.

I ordered chaps from Labonville.com They have video that shows how various chaps help up to a chainsaw.

Curtis

Re: Chainsaw chaps

#10

Re: Video

Stuart Johnson

>I bought my chaps form Labonville and do not find them uncomfortable or hard to put on. I don't spend hours at a time with my chainsaw.

By the way I went form a 20 year old Craftsman to a Stihl and with my first cut I went straight through the log and on through my stand. All the difference in the world.

Re: Chainsaw chaps

#11

Forgot the link  *LINK*

Stuart Johnson

>


Labonville Chaps

Re: Chainsaw chaps

#12

Re: Video

Tommy Holmes

>Allen's accident made a believer out of me that I needed chaps and this video convinced me that these were the chaps to buy. I''ve worn them a few times and don't find them hard to put on or wear. I haven't put them to the test and hope I never will but I sure feel better wearing them.

Re: Chainsaw chaps

#13

Re: Chainsaw chaps

adrien

>One caveat,Bill: The pants can be awfully difficult to pull on over a pair of jeans.

Re: Chainsaw chaps

#14

Re: I bought my chaps...

Allen Neighbors

>from Labonville.com. I got the Full Wrap Chaps. Labonville.com has a video that will demonstrate which chaps will stop the chain BEFORE it gets to your jeans. Those are the ones I ordered. When you read how they measure... Trust me on this... When you think you have the measurement right, add two inches to the measurement. Their chaps turn out to be almost two inches shorter than I thought.

The Chap Pants are hotter than the hubs of hell.

I have the two lower straps adjusted so they buckle on the outside of the leg, which makes them easier to get to. The others are easy enough. Just take the extra 30 seconds it requires to fasten all the straps, to be safe.

Good hunting!

Re: Chainsaw chaps

#16

Re: Chainsaw chaps

Bill Neddow

>I never wears them over jeans, Adrian. Over long underwear if it is -30 degrees. Over my summer underwear when it is warm.

Re: Chainsaw chaps

#17

Re: Chainsaw chaps

HeatherA in Alaska

>Yes Carol, mine came standard with an 18" blade. I got the nifty stihl loggers helmet with the built in face sheild and ear muffs. My husband is convinced that I am going to kill myself and he doesn't want to be a single dad so he is pretty adamant about the safety equiptment. I think that I am going to order the green labonville chaps with the wrap around legs. Going with the green because it is much more slimming than bright orange! I am excited because tomorrow is our annual club chainsaw safety meeting.

Heather

Re: Chainsaw chaps

#18

Re: Chainsaw chaps

JKJ in East TN

>Dave Johnson in "The Good Woodcutter's Guide" recommends safty pants instead of chaps. He said with chaps it's tempting to leave them off for small jobs. He also says leg protection is the most important safety equipment since there are more injuries to the leg than anything.

That said, I bought bright orange chaps and use them a lot but I admit not all the time. Mine have kevlar fibers. One day I found a small chainsaw nick on the lower part of one leg and I have no recollection of how it happened.

I also highly recommend the safety helmets that have built-in hearing protection and screen face shield. I bought two of these and never start the saw without wearing one. Over the years I've had one occasion where the helmet took a sharp blow that would have given me a good headache at minimum.

BTW. the book mentioned above is a excellent read for anyone who plans to use a chainsaw and would prefer to do it safely.

JKJ