Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Indy Fest Demo line up and INFO

Posts

Indy Fest Demo line up and INFO

#1

Indy Fest Demo line up and INFO

Jennifer@Indy.USA

>IndyFest Demo line up

So far we have several demos lined up for the weekend.

On Friday late afternoon Dick Coers will be holding a Sharpening Buffet. He will demonstrate sharpening with the Wolverine jig as well as chisels and plane irons and anything else that need to be sharpened. Saturday will start off with Doug Thompson at 10:00am demonstrating turning a hat from a solid hunk of wood. This is an amazing demonstration so you won't want to miss a minute of it. Bring a folding chair as this demo will have you on the edge of your seat and if you don't have a seat, you'll be sorry! After lunch Vince Welch will be showing us how he power sands with various tools including a random orbital sander that you'll just be amazed at the finish it leaves. It sold me and I had to have one. Then after this Dick Coers will show us how he makes a threaded bolt box. It should be interesting! In between and all around these demos there will be lots of other things going at various lathes. I'm sure Duane leach and Al Crandall will be working their magic on at least one lathe and hopefully Dave Pebbles ( I haven't heard from you Dave but I'm calling you out :)....will also dive in and give a show of his incredible talents. These demos are very low key and laid back so please feel free to wander from demo to demo and get a peek at them all.

Also a reminder about the Gift Exchange. This is really fun for all. If you bring a hand made wooden gift (round or flat) made by YOU. You will go home with a hand made gift. It's tons of fun and a great way to leave with a really neat memory. For those who can't make it or want to donate something to the Indy Fest Raffle, you can donate something to the raffle. This could be a turning blank, a gift card to Rockler/Woodcraft, a hand made item, etc. etc. Tickets are sold for $1 each and I'm not sure where the money goes. Ha! Ray help me out here? Back to WoodCentral? In to the IndyFest kitty for next year? Local Property Tax fund? I'm clueless on this one?

Again the times are...Friday September 14th, 3pm-10pm Is that right Ray or was it 9:00? Saturday Sept. 15, 9:00am - whenever the last log in the fire pit dies.

We are asking for a $15 donation to help defray the cost of the food, drinks, paper goods and Porta Potty (which by the way was the nicest Porta Potty I've ever seen!) You'll get lunch on Friday, Lunch and dinner on Saturday. Did I mention that the food is Scrumpdillyitious?

Hope to see many of you there.

Jen & Ray

Re: Indy Fest Demo line up and INFO

#2

Re: Indy Fest Demo line up and INFO

Cyril Griesbach

>Sounds great, Jen. I had thought of bringing some wood to exchange as well. If that's not on the program maybe I'll just toss some cherry burls into the raffel. Looking forward to it.

Cyril

Re: Indy Fest Demo line up and INFO

#3

Doug Thompson Hat Demo is worth watching *LINK*

Gordon Seto

>Doug Thompson did his practice run for his hat demo for our Club last month. It was really, really good.

He was very well prepared and he took the demo very seriously. It was educational and entertaining. It was a long demo; most of members stayed even after the break. Even I have no intention to turn a hat, I learn a lot about thin wall turning from his demo.

Just watching this demo is worth the trip to Indy Fest. I am not implying that his demo is the only demo worth watching. I just report on what I have seen.

Gordon


Thompson Hat Demo

Re: Indy Fest Demo line up and INFO

#4

Additions to Below!

Jennifer@Indy.USA

>I recieved an email from Ray this morning with some additions that I wasn't aware of. May appologies for just cutting and pasting. These additions are fabulous!

John Lucas (hand held mirrors), Al Crandall (coring, homemade Vacuum

chucks and more), Duane Leach (physics and geometry of tool control),

Jim Dupler (lidded Boxes), Mark Hineman with a Woodmizer, demo of Keith Tomkins bowl thickness gauge. There will be a table set up for folks to practice surface enhancement techniques with someone (Dick Gerard) to help and guide.

Oh, yes and a very special demo by our very own Carole Reed on segmented, multi axis deep hollow vessels with a 1/4" opening. A must see! :)

Lathes setup Vega 26" bowl lathe, Powermatic 3520b, Jet 1642, Jet Mini, Jet 1236. Bring your tools and try out any one of them. We will have material available.

Gallery table, sale or trade table.

So there ya go :)

Jen

Re: Indy Fest Demo line up and INFO

#5

It's a wonderful learning experience because

Doug Thompson near Cleveland

>as Jen said the Indyfest is informal so you can watch a demo up close and not on a TV monitor. You can ask questions, walk around the lathe or sit and relax. It's better than any symposium or club demo.

Bring a folding chair.

Re: Indy Fest Demo line up and INFO

#6

Re: Additions to Below!

Dick Coers

>Jen,

For a minute there, I thought this post was for the raffle table!!! A Wood-mizer, a vacuum chuck,............. Sure would have been worth the $1 ticket!! Might have had to add parking lots in the corn if that was the case.

Looks like a great time, see you there!