Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Neat new tool *LINK*

Posts

Neat new tool *LINK*

#1

Neat new tool *LINK*

Ron in Drums PA

>Can't wait until I get home to try it out


Tilt Box

Re: Neat new tool *LINK*

#2

Andy DiPietro

Re: Neat new tool

Andy DiPietro

>Hi Ron,

Looks like a good new tool. Good for the visually impaired, like myself. I thought you told me that your table saw was mostly a woodturning display table like mine :>)))).

Andy D.

Re: Neat new tool *LINK*

#3

Re: Neat new tool

James McClure

>A friend of mine just got one of these and was very happy with it. He said it was surprisingly accurate. Just zero it out against the table and you're good to go.

Re: Neat new tool *LINK*

#4

Re: Neat new tool

Ron in Drums PA

>All my segmented turnings use staves, which are compound miters.

I find it the easiest to use my compound miter saw for staves.

I plan on using the tilt box to check the miter when I tip the blade.

Now, If I could find a digital protractor to measure the angle when I swing the blade I would be set.

Re: Neat new tool *LINK*

#5

Re: Neat new tool

George Van

>Ron, I want to get one to use on the rest of my grinder. I thought as long as I know what degree reading it was giving and recorded that reading, (doesn�t have to be an accurate absolute reading because the grinder stand is stationary) I could reset the rest to that angle reading the next time I wanted to sharpen that tool. Could you let me know if is accurate enough to do this and that is a possibility once you try yours?

Re: Neat new tool *LINK*

#6

Andy DiPietro

Re: Neat new tool *LINK*

Andy DiPietro

>I wonder if it will work like a protractor in the other plane. You may want to try zeroing the box off the backstop and see if it will measure the cross cut swing angle too.

Or you could buy a Bosch digital protector and set the swing angle with it.

Andy D.


http://www.amazon.com/Bosch-DWM40L-16-Inch-Digital

Re: Neat new tool *LINK*

#7

Just what I needed!

Ron in Drums PA

>Thanks!

Re: Neat new tool *LINK*

#8

Re: Neat new tool

Stuart Johnson

>I have the Wixey which is the same thing and it works great. Just zero it out on the saw table and you are good to go. I've used it on my drill press, jointer and disc sander as well.

Re: Neat new tool *LINK*

#9

Bill Blasic

Re: Neat new tool

Bill Blasic

>I too have the Wixey which I picked up at Rocklers last Saturday.

Re: Neat new tool *LINK*

#10

Re: Neat new tool

RonZ

>I have had the Wixey [same thing] for a while and besides its other uses, I use it to set my sharpening table.

Re: Neat new tool *LINK*

#11

Re: Neat new tool

George Van

>Ron, do you use it for an accurate angle or just a reference angle for re[eatability on the sharpening rest. I would think a bevel angle would be difficult to read off the rest.

Re: Neat new tool *LINK*

#12

Re: Neat new tool

RonZ

>I use the Sorby and Tru-grind sharpening 'tables'. I use this for everything except long ground gouges. I zero it out and adjust the 'table' for 45deg for example. Then I do my bowl gouges and roughing gouges.

Re: Neat new tool *LINK*

#13

Thanks Ron!

George Van

>

Re: Neat new tool *LINK*

#14

Re: Neat new tool

Steve Worcester

>I have a Wixey also, but I don't think it will read or go back to absolute zero, which is a pretty neat feature. Might have to sell the Wixey