Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Happiness is

Posts

Happiness is

#1

Happiness is

Barry ... on SaltSpring

>Having new toys and the time to play with them. This is my new Elbo hollowing rig mounted on my Nova DVR. It is extended to the max over the end of the bed to facilitate this 14" long piece of very dry cherry. Mounted in my new rig is the Mike Hunter carbide cutter in a 3/4 " round bar. (the steady rest by the way is based on a design by Herman DeVries) What a great combination this is, cuts very well into end grain and much easier on this old Bod. I would like to mount the carbide cutter on my Don Pencil swan neck bar, but the thread size is not compatible to both. Has any one tried this, or any ideas? Help on this would be appreciated. I will post a pic when this is finished.

Regards ... Barry


img

Re: Happiness is

#2

Re: Happiness is

Wally Dickerman in Arizona

>Barry, I don't know what size carbide cutter you want to install on your Don Pencil tool. I have one of Mike Hunter's #1 cutters that he has installed on a 3/16 in. cutter on my Stewart tool. I'm impressed by how smooth the surface is when cutting, especially in the bottom, inside of a hollow form.

I'll bet I'm one of very few people here on WC who knows where Saltspring Is. is.

Wally

Re: Happiness is

#3

Re: Happiness is

Barry ... on SaltSpring

>Wally you are right,SaltSpring is a bit off the beaten path. Living on a island isnt for everyone, but for those of us who do, it is a little slice of heaven. And like you I have found the hunter cutter to provide a very smooth cut, this is why I would like to be able to mount this on a 3/4" swan neck for the deeper pieces. Thanks for your comments

Barry

Re: Happiness is

#4

Alwright, where is Salt Spring?

Norm Smith in Nova Scotia

>I live on an Island also.Nice.

Re: Happiness is

#5

Re: Alwright, where is Salt Spring?

Wally Dickerman in Arizona

>I have done a lot of boating in the Gulf Islands. Saltspring in in the center of that group. The Gulf Islands are in Canada between Vancouver Island and The mainland. They are just north of The San Jauan Islands in the US and north of Puget Sound country where I lived most of my life. That is all very beautiful country.

Wally

Re: Happiness is

#6

Re: Alwright, where is Salt Spring?

Barry ... on SaltSpring

>Wally said it better than I could norm and by the way I purchased the Elbo tool partly because of your good experience which you posted in response to my previous inquiry.

regards ..... Barry on SaltSpring

Re: Happiness is

#7

more re Pencil/Hunter combo

GaryG in MD

>I've been wondering the same thing. I have a Scorpion and would like to add a Hunter #3 cutter to the 3/4" shaft. I'm assuming the screw/threads are not compatible? If not, is there a "simple" fix? Can I go to some store and find a screw that will permit them to be mated, or are they basically incompatible without major modification? ...Gary

Re: Happiness is

#8

Re: Happiness is

Jerry L

>I know where it is, matter of fact I visited Salt Spring a few years back. Great ride to the island in a small sea plane. I spent a couple of nice days there.

Re: Happiness is

#9

Re: Happiness is

Ruth Harding

>I'm on Bowen Island, can't see Saltspring from this angle but I can see Tsawassen (the ferry port that takes one to the islands). Guess I'm about 30 miles away as the bird flies.

Re: Happiness is

#10

Re: Happiness is

don lewonczyk

>Barry, nice set up on your DVR. I like your steady rest on the vessel. I have a DVR with 60" between centers it works pretty good on walking sticks. Would you mind sharing the specs on the steady rest? I have only turned a few bowls but no HF yet but would like to try some soon after I get caught up on my farm work which is 7 days a week, ha, caught up nothing! I'll be 69 next month and like to try a few things before I croke. Well thank you in advance if you can help me out. DonL