>I use the Beall wheels on an M2 mandrel on my mini. I buff a bunch of pieces at once and don't mind spinning one wheel off and another on when I am through using one compound. Having three wheels on at once does not appeal to me. I think they would get in the way unless you are only buffing very small pieces. I also prefer the unstitched wheels. They are not as hard.
>Just taken delivery of the Beale 8" buffing kit (single wheel at a time) attached to an old 1450 rpm motor, followed the book of words regarding the 'breaking in' process.
Results so far ... Stunning
Comments ... Why in the name of !%*@~#:!! did I not buy this stuff before!!!!!
>I made my own 3 on one rod and love it for small items like bottle stoppers, sm. hollow forms, ring-holders, etc.
I also have the tripoli and wax wheels separate, I had the post/holder threaded so it can be threaded on the lathe spindle (personal preference). I bought an old grinder, mounted it to the edge of a table and can put these wheels on it for larger items. After having bowls hitting either the lathe ways or the spindle head, it's a pleasure to have nothing in the way.
The stitched wheels (which you can buy at an auto supply store cheaper) are harder (like Carole said) but I like them for certain pieces, they buff faster. I also bought a reg. car buffing wheel that I use with nothing on it to buff up a plate or bowl that just has an oil finish.
Once I tied a piece of a t-shirt around an old car buffing wheel just for fun and it wasn't bad as a polishing, rather than buffing, wheel.
>I bought the Beal one wheel at time system and really like it. I don't think I would want the 3 up system. It seems the would get in the way with each other. No problem to change wheels on the MT2 system. Gives great results.