Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Which? Indy or Tex?

Posts

Which? Indy or Tex?

#1

Which? Indy or Tex?

tdaniel

>I have counted my pennies and I can make it to one turning event this year. I am trying to decide whether to go to INDY or SWAT. I have heard a lot of good things about SWAT and there are several demonstrators there who I have not seen before and I think I can catch a ride there. On the other hand, I really like "hands-on" ( I am one who has to do it to learn it). Are there any opportunities at SWAT to get a tool in my hand and try what I think I have learned before it gets cold?

Re: Which? Indy or Tex?

#2

Re: Which? Indy or Tex?

Jim Rutten

>Hi Terry,

Never been to Indy so I can't comment on that but I've been to SWAT three times and love it. To me, it gives the national symposium a run for its money (only been to one of those though). EVERYONE I met there was just as nice as could be. Hope you will get a response from someone who has been to both because I am curious. I live in KC and Indy wouldn't that much different a drive than Wichita Falls or Temple.

Re: Which? Indy or Tex?

#3

Re: Which? Indy or Tex?

Stuart Johnson

>TD, I've been to two SWAT's just for the vendors and I.G. Both have had an area where some lathes were set up and folks were turning. To be honest I'm not sure if this was part of the vendors demo area or not. I'll be going to see the vendor and I.G. again this year. Hope to see you there.

Re: Which? Indy or Tex?

#4

You can go for the vendor area and IG?

tdaniel

>At the SSS people got pissed at me for doing that.

Re: Which? Indy or Tex?

#5

Re: You can go for the vendor area and IG?

Stuart Johnson

>Yes, the vendor and I.G. is free and open to the public without registration. I thought all the symposiums were this way. I would pay a reasonable amount for a ticket if it came down to that. But, that would put it on the level of the woodworking shows. In my mind there is something wrong with being required to pay for the opportunity to buy something.

Re: Which? Indy or Tex?

#6

scroll down.....

tdaniel

>Stu, that was my understanding too but if you read the post by Fred under the string about "AAW Directors" you will see that I was publicly critisized for doing just what you plan to do. Obviously there are much nicer folks running SWAT than those who are ruining the SSS.

Re: Which? Indy or Tex?

#7

Re: Which? Indy or Tex?

Gary in Zirconia, NC

>Another option is the North Carolina Symposium: http://www.northcarolinawoodturning.com/Vendors.html It is the same weekend as SWAT. October 5-7th. It has a good line up of Demonstrators. It also will have 10 lathes set up for hands on turning and learning for free. If you have questions, please ask since I am on the board of directors for it.

Re: Which? Indy or Tex?

#8

How about the facts TD

Mark Kauder, Phenix City, AL

>TD,

Put out the straight facts, please. You were told you could not enter things for display and sale in the instant gallery as Southern States and Turning Southern Style without being a paying participant. Viewing the instant gallery or going through the vendor area were not blocked to the public.

I promise you would not be allowed to display your items at SWAT with out paying either. AND by the way, the Molly Winton item you talked about being displayed in the SSS I.G., was owned by Ruth Niles, who was a paying participant and the item was not for sale, just display.

Mark

Re: Which? Indy or Tex?

#9

not true

tdaniel

>Sorry Mark. I did not walk in and put my things on the table. I went to the person who was manning the IG and told them I would only be there a couple of hours and I asked permission before putting anything on the table. This was not a judged show and no awards were being given. What is the purpose of an instant gallery anyway? I thought it was for people to share ideas. The only reason I was asked to remove my items was egos because they were getting a lot of attention. This is the first time that I have not registered there either as a vendor or to attend their classes. I had an art show to do on Saturday that prevented me from attending and I quit renting a booth there because they wanted to make rules at the door. Do a little more research, I got screwed and you know it.

TD

Re: Which? Indy or Tex?

#10

Re: Which? Indy or Tex?

Fog Tanner

>Terry,

Our club runs the "hands on" area. It is an area to let people who intested in turning have a try at it, along with those having a "how high can the shavings go" contest. We get a lot of people of all ages pass through. The two guys that give up their time and not make any of the sessions do a great job of running the area.

We still havea laugh from last year, when one of the guys was working away on a platter he saw that someone standing on the other side of the lathe. He was finishing up a cut and just saw the feet/legs and said "if you wait a second,you can give it a try". He heard this voice with a French Canadian accent saying "Oh, so you want me to make you a platter?"...he glanced up to the name tag to find it was Andre Martel standing there looking at what was going on. I am sure that you would be afforded the same opportunity, most likely wouldn't have to ask either.

The MPEC is a great location for a woodturning symposium and you would have a lot of fun there. There appears to be plenty of areas of interest this year and well worth the trip.

Fog

Re: Which? Indy or Tex?

#11

Re: not true

Charles Watson

>There was obviously a misunderstanding, and a learning experience for you and the person you asked to display your work.

Re: Which? Indy or Tex?

#12

Re: I don't know about...

Allen Neighbors

>the hands on, TD, but I sure would like to get to see you at SWAT!!!

Choose SWAT, please!

Re: Which? Indy or Tex?

#13

I'm leaning that way Al.

tdaniel

>All I hear about the SWAT is good and it sounds like it is run by some good folks. That chip throwing contest was the tie breaker.

TD

Re: Which? Indy or Tex?

#14

TD.. you can

Stuart Johnson

>visit the vendor and I.G. free but not display if you aren't registered. I'm also sure you are not allowed to sell items if you aren't a vendor.

Re: Which? Indy or Tex?

#15

Re: I'm leaning that way Al.

Jerry Whitaker

>TD...after attending one of the rotations, you will be able to go to the hands-on area and practice what you just learned. There are a couple of guys from the Gulf Coast Woodturners, (Houston club) that will be available to help if you need it. You will never meet any guys nicer than these. This area is in operation constantly all day long with several lathes available. I know of several new turners who registered and never attended any sessions but rather spent the whole time in the Hands-On area and gained basic and advanced skills that they would have to pay hundreds of dollars to obtain with a big name turner. SWAT advertises to the local community that they are welcome to visit the IG and vendor area. The symposium badge will get you into all the demos and the lunch line. The Saturday night banquet is an extra $25 or $30 if registering at the door or after Sept. 1. At the banquet, 41 raffle tickets will be drawn and the winners will receive a turning donated by an accomplished turner. Several of them will be turnings from the likes of Tom Crosby who often posts on WOW, Cindy Drozda, J. Paul Fennell, Alan Stirt and others. Those tickets will go back into the hopper for the Sunday Lunch raffle and have a 2nd chance to win the Powermatic 3520B lathe along with many other prizes....hence, the 2 for 1 raffle. You will have a good time at SWAT. Hope to see you there. Check out the website if you haven't yet. www.swaturners.org