Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Making your own handles...>>>

Posts

Making your own handles...>>>

#1

Making your own handles...>>>

RonZ

>It was broght up earlier and I thought I'd show mine. I've just started my collection for when I give demonstrations and I decided to make the handles of a similar wood for each type of tool, i.e. the cocobolo for skews and the bocote for spindle gouges. I know the handles might be of fancy wood but have to at least make it look like I know what I'm doing. Comments are welcome and feel free to show yours.


img

Re: Making your own handles...>>>

#2

Re: Making your own handles...>>>

Carole Valentine

>Nice looking handles, Ron. That's what I should do since my tools are currently stuck blade down in a bin of shavings next to my lathe. Different types of would handles would make it easier to get the right one on the first grab.

Re: Making your own handles...>>>

#3

Re: Making your own handles...>>>

RonZ

>On my regular handles, I painted a stripe at the end of the handle, thin to thick to match up with the size of the tool. Its hard to see in the picture but in the middle of the handle I made one groove for 1/2", two for 3/4", etc.

Re: Making your own handles...>>>

#4

Re: Any time the subject of handles....

Jamie Donaldson

>... pops up I think of Rude Osolnik! He had the rattiest bunch of nasty handled tools on the planet! And many had less than a secure fit between tool steel and wood, so he would just hit the wood end of a tool against the lathe bed and keep right on working. Those handles had held many different tool steels over the years, so there was no such thing as a secure fit. I know several people that had presented Rude with nicely made handles as a gift over the years (including myself) and the story is that they became candlesticks and were never seen on a tool again!