Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

My Jet Mini power switch died. Arrrrgh!

Posts

My Jet Mini power switch died. Arrrrgh!

#1

My Jet Mini power switch died. Arrrrgh!

Brian Hahn in SW Wisconsin

>This afternoon I was using my Jet Mini to make a bunch of new cup centers for turning spheres. I went to turn off the lathe and the lathe kept running. Fortunately, the lathe is plugged into a power strip that's mounted on the leg of the lathe stand. Awkward, but it worked. But the power strip switch isn't designed for that type of usage.

I was hoping to take a couple of sphere to the Badger Woodturners meeting tomorrow (Tuesday). My main lathe, a Conover, is set up for bowl turning, not spindle work. Besides, I'm in the process of decommissioning it -- I ordered a new big lathe a while ago and I'm hoping it will arrive any weekend now.

Well, it was at a convenient time to stop for supper. Guess I'll either have to reactivate the Conover for spindle turning, or skip making the spheres...

Re: My Jet Mini power switch died. Arrrrgh!

#2

Re: My Jet Mini power switch died. Arrrrgh!

Cyril Griesbach

>Brian, is that new lathe coming from a local area, perhaps a club member?

Re: My Jet Mini power switch died. Arrrrgh!

#3

You guessed it!

Brian Hahn in SW Wisconsin

>A Robust 25" American Beauty with the Tilt-Away tailstock. :-))

Re: My Jet Mini power switch died. Arrrrgh!

#4

Saved by the junk box

Brian Hahn in SW Wisconsin

>I rummaged through my box of miscellaneous electrical junk and found a replacement toggle switch with the right ratings. After I had removed the old switch from the Mini, I tried flicking the switch and, lo and behold, the toggle mechanism was working again! So I'm back in business.

Re: My Jet Mini power switch died. Arrrrgh!

#5

Happened to me as well

Mike F

>Remove the switch and blow out the accumulated dust & shavings. It might start working again -- it did for me.

Re: My Jet Mini power switch died. Arrrrgh!

#6

Re: Happened to me as well

Chip in Plano

>You might need to flatten the contacts a bit, too. Mine got curved enough that they were making contact anymore. This has worked for me twice in the 2 yrs I've owned my Jet Mini.

Re: My Jet Mini power switch died. Arrrrgh!

#7

Re: Happened to me as well

Brian Hahn in SW Wisconsin

>Just removing the switch apparently was enough to dislodge whatever was blocking the mechanism and make it functional again. I wonder how long before I have to do that again.

Re: My Jet Mini power switch died. Arrrrgh!

#8

Re: My Jet Mini power switch died. Arrrrgh!

JKJ in East TN

>The switch on my Jet 1642 died a few months ago. Upon disassembly, I found it had accumulated enough fine sawdust inside to prevent operation. I can't remember if it's the same switch as the mini, but it was a trick to disassemble. I try to remember to hit it with compressed air occasionally to try to prevent it from happening again.

JKJ