Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Fluted Ash Urn

Posts

Fluted Ash Urn

#1

Fluted Ash Urn

Bruce Forrest

>This is an ash urn which has been fluted, dyed and treated with liming wax. Lacquer finish. It has a capacity of about 240 cubic inches and is about 11 5/8 inches tall in total. The top is held securely to an inner shelf by rare earth magnets.

Comments welcome.


img

Re: Fluted Ash Urn

#2

Re: Fluted Ash Urn

John Veerkamp

>I like it. I hadn't thought of magnets to hold the top of a box/urn. Did you use just one or several spaced around the perimeter? How did you mount them? bore holes, surface mount or what. Beautiful piece.

John

Re: Fluted Ash Urn

#3

Re: Fluted Ash Urn

Bruce Forrest

>I used magnets, cups and washers available from Lee Valley. The use of the cups is supposed to increase the strength of the magnets. I used two 1/2 inch magnets on this. There is a shelf on the inside in which the cups and magnets are attached, and the washers are attached to the lid. (set in so they're flush) . You can use either screws or expoxy to mount. See the Lee Valley website for all sorts of pictures and info on the magnets.

Re: Fluted Ash Urn

#4

That's very nice, Bruce...

GaryG in MD

>I really like your many design and decoration features. Well done. ...Gary

Re: Fluted Ash Urn

#5

Re: Fluted Ash Urn

John Veerkamp

>Thanks Bruce.

Re: Fluted Ash Urn

#6

Re: Fluted Ash Urn

LONGHAIR

>To make the grain appear like that....I assume that this a segmented/staved piece and that the joints are in the bottoms of the flutes?. Could you elaborate, maybe some pics of the process?

Re: Fluted Ash Urn

#7

Re: Fluted Ash Urn

Bruce Forrest

>No, this is not segmented. The body is one piece. It is ash turned endgrain. The ash has very close growth rings, and the fluting causes the waves to appear. Similar things happen with bur oak, although that is much harder to turn.

Re: Fluted Ash Urn

#8

Re: Fluted Ash Urn

Mike Hamilton

>The fluting/grain combination seems so uniform that I have to wonder if the pith is in the center of the form.

Regards,

Mike Hamilton

Plainfield, IN

Re: Fluted Ash Urn

#9

Re: Fluted Ash Urn

Bruce Forrest

>Yes, it's pith centered end grain. It's not a problem with this ash.