Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

My stone crusher...

Posts

My stone crusher...

#1

My stone crusher...

Steve Russell

>Hello to the group,

Tonight's Turning Chat will focus on crushed stone inlay techniques and how to crush your own stone for inlay. Here is a picture of a stone crusher I designed and had a friend weld up for me...

The base is about 12" x 12", the crushing chamber is 2" in diameter and 6" tall. The crushing ram is 15" tall and is solid steel in the lower section, with a large bolt welded to the top so it's easier to remove and replace.

To use my crusher, I simply load a few rough stones into the crushing chamber and replace the crushing ram. The top of the ram is then struck with a sledge hammer, or a hand sledge several times, whilst twisting the ram to mix up the stone in the chamber.

Periodically, I remove the ram and sift the crushed stones, grading them into three sizes, very, very small, small and medium. The graded stones are then placed into plastic bags (recycled from pen kits) for later inlay.

If you get a chance, stop by the Turning Chat tonight for our discussion on crushed stone inlay. Take care and best wishes to you and yours!

Steve Russell

Wednesday Night Turning Chat Moderator


img

Re: My stone crusher...

#2

Send to Ron?

Stuart Johnson

>Steve, If you haven't why don't you send a copy of the photo to Ron Sardo to add to his chat site. I sent him a small Mesquite HF with some inlay for tonight's topic.

Re: My stone crusher...

#3

Re: Send to Ron?

Steve Russell

>Hello Stu,

I had planned to do that, but I've been buried with work in the studio and just got to the pictures today. Is it still too late to send photos? I don't want to burden Ron with a last minute page build...

Steve Russell

Re: My stone crusher...

#4

Re: My stone crusher...

john lucas

>Steve I probably will be very late or not get there for the chat at all. I don't use crushed stone but have used a lot of inlace with all sorts of other materials. I really like the plastic pellets sold by Turtlefeathers to be used in Inlace. It cuts just like the inlace and doesn't dull your tools.

I love your ballon idea. I usually make dams out of masking tape and sometimes even clay depending on the shape I have to fill. With the Inlace you can let it start to thicken and then kind of stir and stuff it into voids. You can also add thickner to epoxy so it's more like a clay and either fill voids or even attach wood together like Marylin Campbell does.

I'll get to the chat as quick as I can. Maybe my meeting will be short.

Re: My stone crusher...

#5

Send it on down!

Ron in Drums PA

>

Re: My stone crusher...

#6

Re: My stone crusher...

Steve Russell

>Hello John,

Thanks for your kind words... I forgot to mention another option with the balloon. If you are using a binary epoxy for the inlay and are concerned that heat may damage the balloon, simply place a couple of layers of folded aluminum foil over the area and inflate the balloon to hold it in place. I've used this several times and never had a balloon pop from the curing heat of the epoxy. Take care and best wishes to you and yours!

P.S. I will post the link to the Inlay Chat today, so you can read it at your leisure.

Steve Russell

EWW, WVP, EWWFS

The Woodlands, Texas