Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

thread cutting jig?

Posts

thread cutting jig?

#1

thread cutting jig?

gary s clarke

>I am interested in a thread cutting jig to work with diameters between 2 and 5 inches. Any suggestions? I have a large oneway and a mini Jet and could use either one to put the jig on. thanks

Re: thread cutting jig?

#2

Re: thread cutting jig? *LINK*

Larry Bisbee

>The Baxter's Thread Master allows you to turn on a Oneway 16", 20", or 24" lathe and thread on the Jet Mini. Models BTM-17 and BTM-24 can be used for milling threads to 5 inches. Check out BEST WOOD TOOLS, 1414 Milo Webb Drive Crossville, TN 38572. Customer Service (931) 788-0429.


http://bestwoodtools.com/

Re: thread cutting jig?

#3

Re: thread cutting jig? *LINK*

Peter Hyde

>Gary,

The jigs that fit on your lathe have a couple of big drawbacks. One is the price and the other is cutter speed. Your lathes cannot run fast enough for the milling cutter to work satisfactorily in most woods. A router set up is a good way to go and this one seems to be one of the most popular.


http://www.atbq.qc.ca/jm2/thread.htm

Re: thread cutting jig?

#4

Re: thread cutting jig?

Mark Kauder, Phenix City, AL

>I have a Baxter Machine from Best Woods, and was just uning it tonight. It works great. I use it for finial, and the like, and use it on my Jet Mini. When I want to thread a big piece, I make an insert on the mini, and glue it in to the larger piece. I could make an adapter to use the machine on my Vega, but what I do now, works for me.

Mark

Re: thread cutting jig?

#5

Re: thread cutting jig?

gary s clarke

>thanks for the info.

Re: thread cutting jig?

#6

Re: thread cutting jig?

Bill Hale / The Wood Spinner

>Peter

I sure like this a lot better than the other. $$$$$ It also looks easy to build. A non fancy square cornered version could be just a few hours to make and sit ready to use at a moments whim.

I also do almost all of my work with a jaw chuck so this is even better for me.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: thread cutting jig?

#7

Re: thread cutting jig? *LINK*

Ralph

>A more "direct" source might be Bonny Klein's original design (see url). If I recall talking with her correctly, she considered the Best Wood a clone, that doesn't pay her a penny.

While PennState does pay her for their using her design.


Bonnie Klein Jig

Re: thread cutting jig?

#9

Neat Jig

Jorge Castaneda

>Bill,

Thanks for posting

JOrge

Re: thread cutting jig?

#10

Re: thread cutting jig? background pic,

gary s clarke

>Bill, nice jig, I like the picture on your wall too. 8)

Re: thread cutting jig?

#11

Huh?

Carole Valentine

>Peter, could you explain the speed thing for me? Just how fast does a lathe have to run? A Jet mini vs will supposedly run from 400 to 3,900 RPM and the Oneway to 0-3,000 RPM. I must not understand what you are saying.

Re: thread cutting jig?

#12

Re: 10,000 to 12,000 rpm in my jig.

Al Crandall (N.E. of Indy)

>

Re: thread cutting jig?

#13

Re: thread cutting jig?

Charles Watson

>I use Baxter's Thread Master on my Jet mini, and it works great.