Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Question on turning porch column bases

Posts

Question on turning porch column bases

#1

Question on turning porch column bases

Gary Walker

>I am wanting to turn a new base for my porch columns. It is 12" in dia and 1 3/8" thick with a cove in the edge. I appears to be made from glued up pieces of pine. Is there a better wood to use for this application? I am afraid of tearout. It will be outside, of course, and painted. I have a lathe and I have done some turning before but no face turning. Any advice on proper tools and tecniques would be greatly appreciated. Thanks, Gary

Re: Question on turning porch column bases

#2

Re: Question on turning porch column bases

Mac

>I am doing some right now.One of the best woods for this type thing is mahogany. It wont rot, but it is very dusty.The end grain in mahogany is not a problem as it sands really well.It holds paint real well and you can laminate it up if you need to.The ones that I am doing are 32" diameter so I am choking down a bit of dust. A mask helps a bit, but having dust collection behind the lathe is the best way to approach it.Good luck with it....

Re: Question on turning porch column bases

#3

Re: Question on turning porch column bases

Mac

>Forgot to mention that a faceplate screwed to plywood backing is probably the easiest way to turn this....

Re: Question on turning porch column bases

#4

Re: Question on turning porch column bases

Bill Grumbine (Kutztown PA)

>I did a job like this a few years ago, and used Spanish Cedar. It has pretty good rot resistance, and turns well.

Bill

Re: Question on turning porch column bases

#5

Re: Question on turning porch column bases

Jim Miles- Charlotte

>Try Trex or Evergrain - the new composite deck material - won't rot, bugs won't eat it, lasts forever, machines, glues, paints, turns great. if it is painted only you will know what it is. Also suggest if new to this, glue up some scrap 2 x 4s and turn a practice piece or 2 before the real thing. Good luck! Also suggest Titebond 3 glue - waterproof.

Re: Question on turning porch column bases

#6

Re: Question on turning porch column bases

Gary Walker

>Thanks for all the great suggestions. As it turns out (no pun intended) I used plain old 2X$'s glued up as an octagon with biscuits 12" in diameter is all I needed to go. Believe it or not I got it right the first time. Looks great, too. Just used wood filler in the voids and primed and painted it. Since the original was installed when my house was built in 1924 and has lasted till now, the one I made should last the remainder of my time here...with a little paint now and then, of course.

Thanks again, Gary

Re: Question on turning porch column bases

#7

Re: Question on turning porch column bases

Carole Valentine

>That's what I was going to suggest, Bill. I use Spanish Cedar for some decorative porch elements. I doesn't rot and bugs don't like it. I did have to use a sealer before painting because of the oils in the wood. Sometimes that stuff will bleed even when it seems to be totally dry.

Re: Question on turning porch column bases

#8

Re: Question on turning porch column bases

Barry Irby

>Gary, I don't want to be a wet blanket, but as a Home Inspector and former builder I used to be offended when I heard "They don't build them like they used to!". Now I realize that one reasons that is true is the wood itself is not the same. The wood they used in 1924 was likely to have been an old growth naturally decay resistant species. Any "plain old" wood you now is not going to to be nearly as decay resistant. My experience is that window sills and other elements rot in four or five years. So, I hope you actually bought some good stuff and sealed and painted it well. Otherwise, its good you know how to make the replacements and next time you can buy better more decay resistant wood.

Re: Question on turning porch column bases

#9

Re: Question on turning porch column bases

Peter Hyde

>I always use a clear paintable wood preservative on all outside projects. Follow up with a high quality OIL base primer and there is usually no problems. Latex primer gives no protection at all. As far as glue goes I always use the plastic resin marine glue in powder form that you mix with water. This is waterproof, all the Titebond iterations are only water resistant so there is a big difference.

My 2c