A while back I post questions about drive and live centers before I dropped some money. You all came through with good information. And before I could order anything, Jamie Donaldson sent me a drive center he didn't need and a starter stash of wood. What pretty stuff was in that little box!
Now before I order the live center, any suggestions about pen turners tools/kits? There was some really lovely stuff that begs to turned into pens.
And I got the stuff to build the Phrugal Photo studio. And my schedule so far has allowed be to sneak and hour here and there to play. Life is good!
>Carol, I have found a good place to buy pen turning supplies is Wood Turninz.com They give good service and good prices. You have to call the to order, or at lease I always have, at (888)736-5487.
For a pen mandrel and some starter pen kits you can't beat Ryan's stuff at Woodturningz. He also makes some really nice looking acrylic blanks that turn great. I think he calls them acrylester or something like that? His prices on Micro Mesh is the best ever too.
What you'll need for pen making is:
1.) Pen mandrel- I like one that you can adjust the length of the mandrel. It has a set screw that you loosen and slide the shaft of the mandrel in or out to adjust. $10-25
2.) bushings that correspond to the pen kit you are making. $1.50-4.00
3.) Pen kit/pen blank
4.)Drill bit that corresponds to the kit you are using. For the basic slim line kit that would be 7mm. I use a good quality bit usually a brad point. $7.00-10.00
5.)Pen Mill or other means of squaring the pen blank ends. Woodturningz sells these too.$15-30 The best ones I've ever bought came from Lee Valley though.
6.)Medium CA glue
7.)Live center to hold the tail stock end of the pen mandrel.
I think that's it? I hope I haven't forgotten anything? I'd also recommend a good pen book. Dick Sing has an early one that's really good and there's several really good pen making videos out there too.
Good luck and have fun! You did a fine job here at my shop so I'm expecting great things!