Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Quality of pen kits

Posts

Quality of pen kits

#1

Quality of pen kits

C.W.Stivison

>I have just started to turn pens because our club is going to turn some feedom pens in November. I thought maybe I should practice. Is there different qualities of pen kits. I've used some from Woodcraft and it seems that after I have assembled them the wood is still alittle larger than the tip piece. I think I have the right bushings and I turn the wood to that diameter.Any suggestions.

Thanks

CW

Re: Quality of pen kits

#2

Re: Quality of pen kits

Ruth Harding

>I like the kits from woodturningz - they are also very cheap.

Re: Quality of pen kits

#3

Re: Quality of pen kits

Kirk (KC) Constable

>I'm not 'confident' in the bushings provided with ANY of the kits I've bought... even the spendy ones. If it doesn't fit just right, it irritates me.

Use a caliper/micrometer (?) or other measuring thingy to compare the bushing to the hardware piece it 'mates up with'. That oughta get you close, then after the first one you can adjust more by sanding the bushing if necessary.

KC

Re: Quality of pen kits

#4

Re: Quality of pen kits

Tim GC

>I have found Craft Supplies (USA) to be pretty good both for kits,blanks and service.

Re: Quality of pen kits

#5

Re: Quality of pen kits

Scott Greaves in Blackfoot Idaho

>Hi C.W.!

Of course there are varying degrees of kit quality! If you are to compare, say, Slimline kits from each of the three manufacturers, there really is little difference other than platings, and some slight style differences. The same pretty much goes for Cigar kits. Differences in quality become more apparent in other kits such as Euros and Americanas.

If you're just practicing, then I recommend the Slimlines from Penn State in Titanium gold plating. Cheap yet durable, they are a perfect practice kit. If you are choosing a kit to make the actual Freedom Pens, remember you need to have a plating that is very durable, so stick with chrome, titanium or such. Gold platings wear off in a matter of months. Black Titanium is a very nice plating. I like the Berea Streamlined Slimline for Freedom Pens, as they are a nice size and shape, and are sturdy kits.

Some penturners won't use Penn State kits as they think they are junk. You need to judge for yourself. Same with Berea and Craft Supplies kits. They all have some winners and they all have some stinkers. Woodcraft, Arizona Silhouette and Beartooth Woods all sell Berea kits. Woodturningz and Packard sell Penn State kits. You can only get Craft Supplies kits from Craft Supplies.

As for the size of bushing not matching up with the actual kit, well, don't rely on the bushing to get you anywhere other than "close". Yes, some bushings are sized properly, but others aren't. Get a nice cheap caliper from Harbor Freight and check your diameters occasionally.

Good Luck! And have fun turning pens for a worthy cause!

Scott.