Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

chuck ID?

Posts

chuck ID?

#1

chuck ID?

ernie miller

>can any one identify the maker of this chuck? 3/4 - 16 threads it is 4 inches in diameter no markings very tight working nice and heavy it was with a carbitech lathe at a sale today I only bought the chuck and tools


img

Re: chuck ID?

#2

Re: chuck ID?

john lucas

>Ernie That is a metal lathe chuck and doesn't work very well with wood. It can be used on smaller pieces but the jaws tend to crush the wood and then is starts to wobble and then it comes out. It works well for small diameter work or very short pieces. Don't throw it away but buy yourself a real woodworking 4 jaw chuck. It holds wood much better.

Re: chuck ID?

#3

Re: chuck ID?

Gil Jones on Lake Seminole GA

>I agree with what John said. I have one like it (from a Unimat lathe), and use it to turn aluminum, brass, and cast iron on my wood lathe.

Gil

Re: chuck ID?

#4

Re: I agree, too....

Allen Neighbors

>with John and Gil. I bought one of them (only larger) from Grizzly, to use on Old Griz, and sent a piece into orbit two or three times.

I finally used my Dremel tool with a cutoff blade, and made the teeth on the long side of the step jaws deeper and sharper. It worked better, but it has never been used since I got my 4-jaw woodturning chucks. I've never lost one with them...(except for one that the tenon separated from the bottom of the piece).

A 4-jaw woodturning chuck is the way to go... I recommend the SuperNova2 or the Oneway. I don't think you can get better than them. (Sorry, Vic)