Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Lemco Tools?

Posts

Lemco Tools?

#1

Lemco Tools?

Ernie Miller

>Any one ever heard of Lemco tools Sedalia MO? I bought a bunch of them at an estste sale today. They look like captive ring or somthing there are several differant sizes any info would be apreciated. Thanks

Re: Lemco Tools?

#2

what are these tools called

ernie miller

>How or what are these tools used for the one missing the ferrell is a scraper I think the tip is welded on and hallow ground. the others I have no real idea about.


img

Re: Lemco Tools?

#3

scraper tip

ernie miller

>here is a picture of the scraper tip


img

Re: Lemco Tools?

#4

Re: Focus Ernie, focus!! The top...

Jamie Donaldson

>... tool is a parting tool- I have one just like if yours is about 1/4"W and about 24"long.

Re: Lemco Tools?

#5

Re: Focus Ernie, focus!! The top...

ernie miller

>I thought that it was shaped a little differant than the others I have. Value? do you know what the others are?

Re: Lemco Tools?

#6

Re: Lemco Tools?

ET

>The two lower ones are tenon sizing tools. You have them shown upside down The shorter pointy end does the cutting until the rounded top end that is rubbing on the top of the spindle slips over the top. Those are pretty small sizing tools but given that thay went with the CarbaTec lathe, I guess they are appropriate for sizing smaller tenons.

I saw tools like these on a British turners web site. He made watch stands with lots of small parts.

Sorbey made a sizing tool attachment that clamped onto the beading and parting tool that worked the same way, only much bigger. ET

Re: Lemco Tools?

#7

Re: Lemco Tools?

ernie miller

>Thanks they are marked 1 inch and 1 1/4 inch I would think that that is fairly large for a chair or somthing?