>This stuff was punky, punky! I decided to try putting water based poly on it to stiffen it up for the finishing cuts, since I did not want to change the color. It worked great. No penetrating finish, just highly sanded and then buffed with white diamond and a little Renaissance wax.
End grain can be a bear on Box Elder. The most I can tell you is be sure your tools are razor sharp and take light cuts. If you try to hog wood when you are cutting, the tear-out seems to pull fibers from very deep in the wood and the you have a real mess, or a "design opportunty" as some prefer to call it. The final series of cuts should be a very, very fine shear cut which produces thread-like curls - not dust. On this piece which was beyond optimum turning age, I used a light coat of waterbased poly, let it harden over night, then made my final shear cuts which removed the poly layer. I used the WB poly because I did not want to give the wood an amber color. I then sanded to 600 and bleached the piece. Final sanding went up to 12,000 micromesh since I used no applied finish other than a little wax. The biggest problem is the inside, but the same advice for sharp tools and light cuts applies.
>Hi Carol; just saw this and I am glad you posted it. As usual the form is �spot on�
I find it interesting your results with the water based poly, I will be forced to get a small can myself to give it a try. I have to wonder how deep the poly penetrated and if it was all cut away or if it is giving you some help in the final finishing also.
>Thanks, George. The poly was all cut/sanded away. If it hadn't been, I believe it would have interfered with the even penetration of the bleach solution.