Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Big Blue's Last Job

Posts

Big Blue's Last Job

#1

Big Blue's Last Job

Bill Grumbine (Kutztown PA)

>Greetings all

Some of you know, after eight years of faithful service, my Poolewood lathe is leaving for a new home. The new owner is picking it up on Saturday. I turned my last job on it this morning, a job that literally let the lathe go out with a bang!

I had a customer call me earlier this week to ask if I could turn some 8" x 8" Douglas fir posts. They were short pieces, finishing out to 15" long, but he wanted some extra left on them for affixing them to the beams where they would be installed. I told him it was either now or the end of September, since that is when the Robust is due to arrive. He told me he wanted them round. How hard could that be?

When he arrived with a measured drawing from the architect, I saw how hard it could be. The shape was simple enough, but they weren't exactly round. They had to have a square to round transition, requiring a pommel cut. Now, I have made pommel cuts by the thousand, and teach and demo them on a regular basis. But this was going to be the mother of all pommel cuts! The architect had specified a transition from the 8" square (7 1/2" actually, since this is dimensional lumber) to 5" round! Fortunately for me, he brought spares.


The total reach for this cut was 3 1/2", accounting for the slight curvature. I got two done with my wee little 1 1/4" skew with the short handle I keep meaning to lengthen. But I blew two up as well, and of course, it was on the finishing cut for that very part, that cut where you look at the thing and say to yourself, "I'm going to take just one more cut and it will be perfect!"


This is what perfect looks like when you don't quite get it. So, off to Woodcraft I went, and returned home with the biggest skew they had, an Alan Lacer model. I don't care much for the curved edge, but that is easy enough to fix. At any rate, a little honing, and I was able to complete the last post without any more bone jarring, blood pressure raising catches. I had these things on a faceplate, and the catch in the picture above was enough to bend every single screw holding the thing on. I was very happy that no damage was done to the lathe, only the wood and my ego.

Thanks for taking a look.

Bill

Re: Big Blue's Last Job

#2

Re: Big Blue's Last Job

Don in Central Illinois

>That last picture makes me not feel so bad after looking at my attempts using my skew. I'll get it right someday. Thanks for posting that this can happen to anyone, even a great turner like Bill.

Re: Big Blue's Last Job

#3

Re: Big Blue's Last Job

Cyril Griesbach

>Bill, now I understand what you mean by going out with a "Bang". I'm sure we'll all look forward to your report on the new Robust.

Re: Big Blue's Last Job

#4

Re: Big Blue's Last Job

john lucas

>Bill That always happens to me about the time I get real cocky and say to myself, damn I'm good at this, Bang, puts me right back where I should be.

Re: Big Blue's Last Job

#5

Re: Big Blue's Last Job

robo hippy

>For a pommel cut that steep, I use my bowl gouge. Just easier for me to do.

robo hippy

Re: Big Blue's Last Job

#6

Brent English's new toolrests ...

Ed Moore

>have had the catches removed. So, the Robust should make that easier.

Enjoy the Lacer skew. The rounded edge removes a few of the catches too.

I'm also looking forward to your Robust report.

Ed

Re: Big Blue's Last Job

#7

Bigger skew = easier?

wilbur

>"I got two done with my wee little 1 1/4" skew with the short handle I keep meaning to lengthen. But I blew two up as well, and of course, it was on the finishing cut for that very part, that cut where you look at the thing and say to yourself, "I'm going to take just one more cut and it will be perfect!"

This is what perfect looks like when you don't quite get it. So, off to Woodcraft I went, and returned home with the biggest skew they had, an Alan Lacer model."

The big Alan lacer skew is 1 3/8", only 1/8" wider than the one you were using. Did that 1/8" really make that much of a difference?

Re: Big Blue's Last Job

#8

Re: Big Blue's Last Job

Bill Grumbine (Kutztown PA)

>Don, I've seen some very big names in the business get catches. I tell people there are only two kinds of people who don't get them, those who don't turn, and liars.

Cyril, the bang was loud enough that I was afraid to look for a minute, not because of the wood, but for fear I would find something broken on the Poolewood three days before delivery!

John, I know just what you mean.

Reed, there was no way the bowl gouge was going to make this cut. I stuck it in there every way I know how, and the cut came out ragged every time. But the skew left a nice smooth surface - well, except for that one!

Ed, I am going to make sure I have a supply of those tool rests.

Wilbur, the extra 1/8" in width had nothing to do with it. But, the Lacer skew is longer, both in the steel, and significantly so in the handle, as well as thicker in its cross section. This catch came from hanging the tool over the edge just about as far as it could go, and not having much in the way of the handle to hang onto. I suppose I could have turned a new handle for my skew, but I needed a break from the shop, and I had to go into town anyway. This brings my skew stable up to seven now, but that doesn't count the 1/2" straight chisel I use on occasion. I'm not trying to sell skews for Alan or Hamlet, I'm just saying that the extra weight and length made all the difference for me on a cut this deep.

Bill

Re: Big Blue's Last Job

#9

Re: Big Blue's Last Job

john lucas

>Bill That is a task that can be done quite well with Doug Thompsons larger spindle gouges. They have so much meat under the cutting edge that they don't vibrate.

Re: Big Blue's Last Job

#10

Steven Antonucci

How many of us WC'ers have turned on Blue?

steve antonucci

>I know I have.

Chime in as a salute to "her" (Pretty sure all lathes are women since they throw things at you when you make a mistake :-o )!

Steven

Re: Big Blue's Last Job

#11

Re: How many of us WC'ers have turned on Blue?

Mark Mandell - Gone Round In Jersey

>Not to mention speeding up when the knobs get twisted, or making you go in circles, or having to wear sunglasses to core a bowl.

[Yeah, add me to the list |;-}} ]

Bye Blue. . .

Re: Big Blue's Last Job

#12

I Have Turned on Blue, back in October 1999

Jim Shaver - Oakville, Ontario

>

Re: Big Blue's Last Job

#13

Re: Big Blue's Last Job

Doug Thompson near Cleveland

>I make a 5/8 diameter detail gouge for the really big jobs, matter of fact could make any size gouge up to 1-1/4 diameter.

Re: Big Blue's Last Job

#14

Re: How many of us WC'ers have turned on Blue?

HarryB in Kulpsville

>I did too, in July of 2003.

Re: Big Blue's Last Job

#15

Re: How many of us WC'ers have turned on Blue?

Mike Rubes, Apex, NC

>Hi Steve,

Neat idea! I turned on Big Blue in July of 2004 or 2003, I cannot remember which year it was, heck it might have been both :)

Bye, Big Blue,

Mike

Pushing the limits of my Jet Mini today in Apex, NC

Re: Big Blue's Last Job

#16

Re: But, Big Black is coming!!!! :)

Allen Neighbors

>

Re: Big Blue's Last Job

#17

Me too in 2001!

Dominic Greco in Richboro PA

>Thats when I took a class with Bill and turned a bowl on Big blue for the first time.

Re: Big Blue's Last Job

#18

Re: How many of us WC'ers have turned on Blue?

Charlie Anderson

>I have.

Now I'm looking forward to the next one. Maybe Bill can bring it when he demos in DC in Nov.

Re: Big Blue's Last Job

#19

Re: How many of us WC'ers have turned on Blue?

Tom Sweeney - Coatesville PA

>Count me in - I rough turned a cherry bowl, which I proceeded to blow up at home when the bark inclusion got too thin :-O & finished turned another one at my fantastic all day lesson a few years back & then I did a little turning on it at last years 5 barns. Plus I helped Bill load it on his truck to take to the 1st DVD taping - not as much fun, but still rewarding :-)

A new robust eh - maybe I'll have to come up for another lesson if I ever get back into the shop since I probably forgot how to turn by now.

Re: Big Blue's Last Job

#20

Re: How many of us WC'ers have turned on Blue?

David Propst

>I fell in love with Blue when we met during a lesson with Bill in Oct 2000. In 2002 one of her sisters came to live in my shop which I have never regretted. I hope Bill is sending her to a good home. She is a fine lathe with a great history.

David

Re: Big Blue's Last Job

#21

Me too....

Gerry Meekins

>She's the first Lathe I turned on and could have a conversation at the same time without yelling at the top of your lungs..

Cheers to you "Ole Blue"!!

Gerry

Re: Big Blue's Last Job

#22

Add me to the list...

Jorge Castaneda

>Big Blue was the lathe where I saw a bowl turned for the first time, by and by I got to turn one with it too.

Thanks BB!

Thanks BG!

Jorge

Re: Big Blue's Last Job

#23

Me too! October 1999......

Jennifer@Indy.USA

>Hey were you there? Oh, yea, you were there Jim :)

How could I forget. A mini Badger Pond gathering. Colonel George, John Renzetti, me, you...oh what fun that was! I have a picture somewhere..I'll have to dig for it.

Jen

Re: Big Blue's Last Job

#24

Re: Big Blue's Last Job

Bill Grumbine (Kutztown PA)

>Well, Ole Blue is gone. I just got home from delivering it to its new owner, who is just as tickled as I was the day I brought it home. I have enjoyed reading through the posts of those of you who have been here to turn on it. It brought back a lot of good memories. I hope that I will have opportunity to make many more with the new Robust when it arrives.

Bill

Re: Big Blue's Last Job

#25

Re: How many of us WC'ers have turned on Blue?

ed scolforo

>Me too, 5/10/2005.