Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Maple Hollow Form

Posts

Maple Hollow Form

#1

Maple Hollow Form

Bill Grumbine (Kutztown PA)

>Greetings all

Some of you have seen this already, on the web or in person, but here it is for anyone who hasn't and might be interested.


This is a piece of maple from an entire tree covered with this stuff, given to me by my tree guy. Apparently it was in the fence row of a neighbor's farm, and was starting to come down. He stopped by and asked if he could have the wood! It is one thing for us to stop by and ask for wood, but when we get others stopping to ask for wood for us, how can you beat that!?! But anyway...

Overall size is 6 1/2" high and 7 1/2" in diameter. It is hollowed to 3/16" most of the way down, but I left it just a little thicker in the bottom for some better rocking action. The bottom is round. It is finished with Bush Oil and buffed.

Thanks for taking a look.

And no Dominic, it is not the same tree as the one we saw growing in the other tree guy's yard. This is a different one!

Bill

Re: Maple Hollow Form

#2

Re: Maple Hollow Form

Cyril Griesbach

>It's a beauty, Bill. What luck to have this kind of wood given to you. Hope he gets a finished piece from it as well. Knowing you he will.

Re: Maple Hollow Form

#3

Re: Maple Hollow Form

Robert D. Macgregor

>Nice piece.

How did you hold it to turn the bottom?

Re: Maple Hollow Form

#4

Re: Maple Hollow Form

George Van

>That�s a beauty Bill! I like the fact that you were able to get a pleasing curve and still retain the natural edge. The Bush oil seems to be working very well for you. I�m sure generosity is just being returned as far as the fellow finding wood for you.

Re: Maple Hollow Form

#5

Hi Bill,

Dominic Greco in Richboro PA

>Bill,

Outstanding looking! Even if it isn't from that maple tree. Which BTW, I SAW FIRST. :>)

I know, I know. This coming from a guy who just was given a HUGE chunk of cherry burl (which I have yet to turn). :>)

Se ya around,

Dominic

Re: Maple Hollow Form

#6

Re: Maple Hollow Form

Bill Grumbine (Kutztown PA)

>Thanks guys!

Yes, I take very good care of my tree guy, to the point where he gets pieces better than he expects. I even make pieces for the crew, because they are the guys who help me load tons of logs onto my trailer when I come to pick stuff up.

Robert, this was finished between centers, sort of. I thought to myself, using my keen perceptive abilities, that this would be perfect for the vacuum chuck. Only after I had the chuck on the lathe did I realize that the hole in the top was on the wrong side, and there wasn't going to be any vacuum. However, I would have gotten the chuck on the lathe anyway (I just wouldn't have hooked up the hose). It makes a great friction chuck for driving pieces like this one. So, it went between centers, and I turned off as much of the tenon as possible, keeping the curve of the bottom going all the way through. The rest is finished with a hand held sander off the lathe.

Bill