Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

First Lathe *LINK*

Posts

First Lathe *LINK*

#1

First Lathe *LINK*

Ken Bellock (Houston, TX)

>I have decided to try my hands at turning. Some projects that come to mind that I would like to be able to make are small bowls, spindles, and even wands for my nieces and nephews. After a long break in my woodworking hobby, I have spent the last 2 years really getting back into putting serious time in my garage shop. With just about every tool purchase I have made, I have had enough hands on experiance to know what it was that I was looking for, but I have never touched a lathe in my life, and none of my friends that have the woodworking bug have a lathe that I can monkey around with to get a feel for it. Generally when I buy a tool, I like to spend the extra cash to know it will serve me well and for many years, but I don't want to drop a couple grand a lathe not knowing if I'm going to thoroughly enjoy it as much as my other tasks in the shop.

So after all that background, my question is, is this a good starter lathe, and is it a good price. In addition to this lathe, if it was what I bought, what other gear would I need to get started? The safety equipment of course, and a set of tools to start with (lee valley?), but what about chucks, or other equipment I'm not yet familiar with? I have found the knowledge base in the main messaging group to be invaluable to the growth of my skills, so what I'm looking for is the hind site of those already developing this skill here to share, if they could, what they wish they knew when they had started. "I would have bought this", or "I shouldn't have bought this tool set", or "the best lathe to learn on is actually," or "The absolute best reference for using the lathe is this book written by..."

I'm going to be watching this group, and others, and reading a lot, but I would like a good basic lathe to have sitting in my garage while I develop this new skill. One thing I learned a long time ago is that it's great to read the magazines, message groups, and books for technique, but nothing can teach you as fast as putting your hands on the wood.

Hope you are all having a great day, and thanks for any input you are willing to share!

Ken


Delta LA200

Re: First Lathe *LINK*

#2

Re: First Lathe

john lucas

>Ken That's a decent lathe for an excellent price. They haven't been as good as the Jet Mini but at that price I think it will serve you quite well.

You will need some turning tools. don't buy a set. look through the archives on what tools are needed and make a decision. I would suggest a 3/4" rough out gouge, a 1/2" spindle gouge, a parting tool, a round nose scraper and a 3/8" bowl gouge.

It would be nice to buy one of the sharpening jigs but not necessary. I would highly suggest getting the sharpening DVD from the AAW website. It will help you tremendously. After watching this you can decide if you need a sharpening jig. You will need a way to sharpen, a grinder is what most people use but a strip sander or disc sander can also be used.

You will need a faceplate and drive center and live tail center. Those things probably come with the lathe. A 4 jaw woodturning chuck would certainly be nice but you don't really need one of those.

Re: First Lathe *LINK*

#3

Re: The very best tool for a ....................

Jamie Donaldson

>.....beginner is a lesson from an experienced turner. Check for a Woodcraft store class or a local AAW chapter and attend a meeting. Don't even buy a tool before you take a test drive with another turner, then seek advice for a purchase of a real lathe that will be suited to your aspirations.

Re: First Lathe *LINK*

#4

Re: First Lathe

Ken Bellock (Houston, TX)

>Thanks for the response John.

I'll take your advice with not buying the set, but would you recommend a certain maker for the steel? Is there any names out there known for holding an edge better than the others?

I have gotten very good at sharpening with sandpaper, and would probably give that a go with these tools, but if I find the profiles too dificult to manage, I'll send off for the DVD you mentioned.

Thank you for all the advice!

Re: First Lathe *LINK*

#5

Re: First Lathe *LINK*

Mark Wollschlager

>As Jamie Says, check out local resources before spending a bunch of money.

They will be very helpful in the helping you spend department. :-)

Also they will have lots of experience and can let you touch and see potential purchases.

The local AAW chapter is:


Gulf Coast Woodturners

Re: First Lathe *LINK*

#6

My starter list:

TDaniel

>Ken, as several have already said, go get that one day beginner's lesson before you start. It can make your learning curve much shorter when you start out right. It can also make it much safer.

For tools buy the cheap set from harbor freight, about $39. (While at Harbor Freight get their cheap set of calipers for spindle turning.) The steel in their set is good and while you are learning to sharpen $5 per tool is pretty cheap so you can alter grinding profiles and learn which profile works best for you. Next buy a good (Sorby) thin fluted parting tool and a 3/8 or 1/2" bowl gouge with a "U" shaped flute (Sorby or One-way) and a fingernail profiling jig. Most of us use a 1750 rpm 8" grinder but whatever you have will probably work for a while. After these you will want a drill chuck to fit your tailstock and a chuck. The Grizzly chuck for about $100 will get you started. You can make a pretty good caliper for checking wall thickness using a stiff piece of wire. If you have a bandsaw you will want to order a 3 tpi blade for it. Most of us like the Timberwolf best.

Be aware that the bandsaw was not made for woodturners and we tend to use it in ways the manufacturer never intended. Get a lesson on the bandsaw from a good turner while you still have 10 fingers.

As far as the choice of a lathe is concerned: That depends mostly on the balance in your checkbook. If you can stand it up front go with a good lathe that is known to have excellent resale value, then if you don't like turning it won't be hard to get most of your money back. You are more likely to enjoy turning if you start with good equipment then if you start with a bottom end lathe. As a good starter lathe that you will not soon outgrow you can't beat the One-way 1640. It is a very good lathe and it has about the best resale value of any lathe made.

TD

Re: First Lathe *LINK*

#7

Consider a jet Mini with ... *LINK*

Ed Moore

>variable speed. It is a little more money than the Delta you mentioned, but well worth the difference. And, its resale value will hold in case you choose not to continue with turning. From personal experience I don't recommend that Delta.

You have received excellent advice and I urge you to get in touch with the Gulf Coast group. I'll bet that some of them live near you and would be very happy for you to come by for a test drive.

As to tools, I agree with John Lucas' list except that I prefer the 1/2" bowl gouge and the 3/8" spindle gouge. This list from Sorby or Crown would be good, but you probably could save money and get excellent tools from Brad Packard. See the link. Service and tools are excellent. I think that M2 tools from Packard as John and I have suggested would serve a beginner very well. But getting some help from a good teacher will increase your fun and ability immeasurably.

Ed


Packard Tools

Re: First Lathe *LINK*

#8

Packard's tools

Carole Valentine

>are about the best bang for the buck I have found. I have several brands of gouges and the Packard 3/8" seems to always be in my hand. Good steel, comfortable well balanced handle and inexpensive.

Re: First Lathe *LINK*

#9

Re: First Lathe

Ken Bellock (Houston, TX)

>Thank you for all the responses.

There is a local Woodcraft here that I was going to check out for an into class, but the link to the GCWA looks like a much better place to start. I'll skip the Delta, and just save up for something nicer. I'm sure after I give it a try, I'll be hooked and buying something nicer any way. In the mean time I have recorded all your tool suggestions in my notebook, and I'll start collecting an assortment while getting time on other lathes.

Thanks again for all the great advice!

Ken

Re: First Lathe *LINK*

#10

Re: Ken, I dodged the Delta...

Allen Neighbors

>after posting a question about mini lathes on this forum. It seems they don't hold up too well. I finally went with the Vicmarc VL100... 10inch Swing, 15" between centers. If you do a search on this forum for Vicmarc VL100, about 7-10 Aug, you can see pics of it the way I have it rigged for travel.

I used it all week long, sitting on the tailgate of my truck. It's a wonderful little lathe. And it'll take any chunk of wood you can put on it. Centers line up perfectly. Toolrest and Tailstock move easily, and lock positively. Changing speeds is a 10 second pause. It amazed me!

The VS model sells for $759 complete. The Benchtop model, which I bought sells for $359 with everything but the motor. (It comes with the step-pulley for the motor, also) I put a used 1/2 horse motor on it and it's awesome.

My third choice was the Jet Mini. If I hadn't bought the Vic I'd have bought the Jet.

Re: First Lathe *LINK*

#11

Re: First Lathe

Fog Tanner

>Ken,

Too bad you didn't post this last week. GCWA just had its meeting this past Saturday and you would have been most welcome. The club members pretty much have the spectrum of brands covered, along with all the various sizes. Along with that you will find the same with tools. We have all been in your position at one time or another and gone through the same issues. Any lathe you are thinking about buying, someone in the club probably already has it. We also have an annual retreat in May of each year. It is a weekend of woodturning with a number of formal handson sessions. This past year we had a beginners only section that had 23 people all making shavings. There are also informal sessions in the evening where you can work on what ever is giving you problems.

Another thing you may want to consider is the "First Monday" that is hosted at The Cutting Edge in Houston. It is quiet literally the first Monday of each month from 7:00-9:00 pm. Its an informal session hosted by the Cutting Edge, quiet possible you can try your hand. That was how I got hooked. The Cutting Edge also has the largest selection of turning tools in the Houston area and the best prices. Steve is a woodturner and only carries quality tools, like Henry Taylor and some Sorby.

Re: First Lathe *LINK*

#12

Re: First Lathe

Rick Davenport

>The Delta Midi was my starter lathe.

I still have it and use it occasionally.

It sits on a bench near my Mustard Monster.

I have turned on both Jet and Delta of that size and barring the variable speed of the Jet, I could notice little difference.

BOTH are good starter lathes in my opinion.

R

Re: First Lathe *LINK*

#13

Re: First Lathe

Cyril Griesbach

>Ken,

You've gotten lots of great advice here already but I'll still toss in my two cents.

If I had known about the local AAW chapter when I got started turning I'd have skipped a lot of my early mistakes both in purchases and in skill progression. It's really hard to describe how friendly and outgoing turners can be and help is usually had simply for the asking. Surely some formal training is worth all you might pay but the help you can get from your local turning club and your local turners can be worth far more than your initial equipment costs. And, you'll meet some wonderful people and make some great new friends. Welcome to the group.

Cyril

Re: First Lathe *LINK*

#14

Re: First Lathe

john lucas

>Ken There is an excellent article in this months Wood magazine on what all you need to get started in woodturning.

Re: First Lathe *LINK*

#15

Re: First Lathe

Ken Bellock (Houston, TX)

>I had to be in New Braunfels last weekend, so it wouldn't have worked out anyway for the GCWA, but I'll be trying for their next meeting. I will also definitely be checking out the Cutting Edge. I first found their web site through a link on Sorby's home page. I have been meaning to go over there for a while now to see their store, I'll be doing that the first Monday in September now.

Thanks!

Re: First Lathe *LINK*

#16

Re: First Lathe

Ken Bellock (Houston, TX)

>Cyril,

Thanks for the advice and the welcome, I will definitely be heading to one of the coming GCWA meetings before buying or starting anything.

Take care, and thanks again, I greatly appreciate all the help and advice people take the time to hand out here,

Ken