Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Tool for HF

Posts

Tool for HF

#1

Tool for HF

Richard Jones

>Looking to start turning a few hollow forms. Am wondering about a good �starter� tool. Am looking at the Sorby with the bent neck. IF this is suitable for 4-6� dia pieces, would I also get additional cutters? If so, which ones?

Many thanks from the suburbs of beautiful, downtown Deatonville, VA�������

Rich

Re: Tool for HF

#2

Re: Tool for HF

Carole Valentine

>I started with a Don Pencil Scorpion and Stinger (Stinger is for small turnings with small openings) I think this is a good set to learn hollow forms on. I use my Kelton hollowers most of the time now.

Re: Tool for HF

#3

Re: Tool for HF

stacey s

>I have been pleased with the John Jordan tools. They are the only ones that I have used so I can't compare them to other but I am relly pleased with them. He makes both a small and large set. They both work well. The small set would work fine for the 4-6" size.

Stacey

Re: Tool for HF

#4

Dick Hines

Re: Tool for HF

Dick Hines

>Hi Richard. How are things going in good old Farmville?

I started with the Kelton tools. I have 3 set of bars I have the 5/8" ,3/4" and the 5/16" bars. I also use the captured tool rig. Last spring I picked up a Jamieson rig. There are lots of hollowing tools out there. If you can try to use a few before you drop the coins. If you don't I guarantee you will end up with more than 1 set.

Re: Tool for HF

#5

Re: Tool for HF

keith zimmerman, Normal IL

>I started with two sizes of the Sorby and moved to the Keltons. I have the mini and 1/2" sizes. I use the minis in their handle and the 1/2" in Don Pencil's Scorpion armbrace.

keith

Re: Tool for HF

#6

Re: Tool for HF

Philip Morris

>You may want to review Lyn J. Mangiameli's articles on hollowing tools at:

http://www.fholder.com/Woodturning/lyn.html

Re: Tool for HF

#7

Paul Porter

If you have some way... *LINK*

Paul Porter

>...to make tools or know somebody who will make tools for you, here is a great little hollowing tool for hollow forms up to about eight inches in diameter and six inches deep. It's made from 5/8s round bar stock (hot or cold rolled, I don't know which) with a 24 inch handle. I have a plan if you are interested. You can get the swivel head cutter holder from this URL: http://www.lathedweller.com/


img

More hollowing tool photos

Re: Tool for HF

#8

Re: Tool for HF

Richard Jones

>Thanks guys, lots of good info here, and, as usual, not easy decisions for moi...............:(

Dick, doing fine here, been busy with the store and the twins, just getting back to having a bit of time to turn. Hope to see you in Richmond soon.

Rich

Re: Tool for HF

#9

Re: Tool for HF

john lucas

>Richard As many of you know I'm a fan of the John Jordan hollowing tools. They are simple, and they work. John does nothing but hollow forms so these have been designed after 30 or so years hollowing. The tools bits are easily replaceable and inexpensive to buy. They are easy to sharpen. You can hog of wood or take super light cuts without changing bits.

Re: Tool for HF

#10

Re: Tool for HF

Bob Fawcett

>I have the large Sorby with semi circular bend and it comes with 2 cutters. I have not done muc hollowing, so it may be my inexperience, but I don't like it. I also have a Oneway Termite, and find it easier to use than the Sorby.

Re: Tool for HF

#11

Re: Adding to John's reply, I like ....

Jamie Donaldson

>... to use the Jordan tools in a Sorby(Stewart) armbrace handle- saves a lot of wear and tear on the arm. Learn to hollow with the basic tools before buying some expensive laser/captured bar system or other gimmicks.

Re: Tool for HF

#12

Dick Hines

Re: Tool for HF

Dick Hines

>We would be glad to have you any time.

Re: Tool for HF

#13

Re: Tool for HF

Jimiles-Charlotte, NC

>The Termite tool ( ring tool ) is a good beginners choice and relatively cheap. You can always graduate to the more costly & complicated systems later with some experience.