Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Weekend Work

Posts

Weekend Work

#1

Weekend Work

Mark Mandell - Gone Round In Jersey

>Haven't posted stuff in a while so

This is a Box Elder "vase" 13"x6". Understand this wasn't supposed to be a vase; it was originally done to be a jar necked in to a 1-1/2" opening from where the rim is now to about 15" total. However, while hollowing the last inch or so, I lost the set screw on my Jordan bar, got a huge [WHAMBO!] catch, and the bar shattered to top and split the sides when it bounced on the tool rest. Filled the splits with resin tinted with "Bordeaux" Transtint, CA'd the micro cracks, and was able to finish the form. Not great on the inside (some ridges and bumps) but the wood is just too fragile to risk any more cutting.

Comments Welcome


img

Re: Weekend Work

#2

Re: Weekend Work - 2

Mark Mandell - Gone Round In Jersey

>This is a chunk from a spalted Ambrosia Maple burl that I was given. Thing is dry as a bone.

The jar is 8" high by about 3-1/2 wide hollowed to about 3/16 on my laser rig. Finish is two coats of Matt Krylon and rubbed with white synthetic wool. Color here is pretty accurate.

Comments welcome.

mm


img

Re: Weekend Work

#3

Great save!

Pat Taylor

>

Re: Weekend Work

#4

Steven Antonucci

When I get those catches...

steve antonucci

>I save the pieces for experimenting with new techniques. Maybe burning or texturing, coloring, leafing... I've got a whole shelf of them.

This probably represents 4 hours worth of work (base upon what it would take me hand held?), and it looks like a great piece of wood. I have two somewhat smaller versions in my shop that now hold pencils because I could bear to part with them (one in osage orange and the other in cherry).

I've seen your work (and it's better than this), and I personally would have let this one go.

May not be popular, but it's what I'd have done.

Steven

Re: Weekend Work

#5

Steven Antonucci

I like this one much better

steve antonucci

>Like the lower form, but it looks like it has a very tall, thick neck? Is it undercut and hollowed in the neck as well? Let's get a profile shot if you have a minute.

Steven

Re: Weekend Work

#6

Re: Funky Save

Mark Mandell - Gone Round In Jersey

>I'll admit to its being somewhere in the nature of an umbrella stand, but put it up anyway for the "can this wood be saved?" catagory. When it lost the top/neck/rim the curve got left a bit "flat". Had though about reconstructing the rim/neck (which I have) but couldn't come up with a satisfying way to fill the remaining gap.

mm

Re: Weekend Work

#7

Re: Hollowed

Mark Mandell - Gone Round In Jersey

>Top/neck is pretty thin, and yes, undercut all the way down through the 1/2" hole. Further "film" will have to wait the end of the workday. |;-}

Re: Weekend Work

#8

Quittin' Time Already?

Mark Mandell - Gone Round In Jersey

>Here's the profile you asked for . . .


img