Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Doug Thompson Hat Demo

Posts

Doug Thompson Hat Demo

#1

Doug Thompson Hat Demo

Gordon Seto

>Doug lost his virginity yesterday. He did his first hat demo for our Club (http://bwwt.org/). He was very well prepared, funny, educational and entertaining. Just like his Thompson Tools, it was the best. He didn't rushed through the process; he took time to explain everything. The demo was almost 3 hour long; I was surprised at the attention all the attendees have. Nobody was dozing off; no small groups talking at the back.

Trails of shavings shooting high in picture.


img

Re: Doug Thompson Hat Demo

#2

Re: Doug Thompson Hat Demo

Gordon Seto

>Cutting the hat rim.


img

Re: Doug Thompson Hat Demo

#3

Re: Doug Thompson Hat Demo

Gordon Seto

>Hollowing inside


img

Re: Doug Thompson Hat Demo

#4

Re: Doug Thompson Hat Demo

Gordon Seto

>STILL too thick!


img

Re: Doug Thompson Hat Demo

#5

Re: Doug Thompson Hat Demo

Gordon Seto

>Turning the top of the hat to match the profile of the inside


img

Re: Doug Thompson Hat Demo

#6

Re: Doug Thompson Hat Demo

Doug Thompson near Cleveland

>Thanks Gordon, I just started another post a couple minutes ago. Great minds think alike LoL.

That guy needs some hair on top of his head.

Re: Doug Thompson Hat Demo

#7

Re: Doug Thompson Hat Demo

Gordon Seto

>Hat in shape forming stand.

Thanks, Doug for helping us out. I am a lousy turner; but I am semi-professional demonstration watcher. I have been fortunate to belong to two active Clubs and attended several symposiums. I know it is unfair to compare some of the professional turners to your 1st demonstration. You are among the best of the best demonstrators. There was not a dull moment.

Gordon


img

Re: Doug Thompson Hat Demo

#8

Re: Doug Thompson Hat Demo

Vince

>Nice job Doug!!!!

Vince

www.VincesWoodNWonders.com

Re: Doug Thompson Hat Demo

#9

Bill Blasic

Re: Doug Thompson Hat Demo

Bill Blasic

>I was lucky enough to see this demo and I must concur with Gordon on all he says. Had Doug not noted that this was his first ever demo I would not have known it. It was a great demo! Good job Doug!

(P.S. I have seen Gordon's work and he is a very good turner in spite of what he says.)

Re: Doug Thompson Hat Demo

#10

Thanks, Gordon is a Outstanding woodturner!

Doug Thompson near Cleveland

>

Re: Doug Thompson Hat Demo

#11

Re: Doug Thompson Hat Demo

Bill Noce in Northeast Ohio

>I to agree with Gordon and Bill for being a first time demo Doug did an outstanding job. It was very well explained every move that he made. Demo well done Doug......

Bill

Re: Doug Thompson Hat Demo

#12

Re: Doug Thompson Hat Demo

GaryG in MD

>Gordon, Thanks for the shots. Good turning and good photo work. That's fun to see. ...Gary

Re: Doug Thompson Hat Demo

#13

Re: Doug Thompson Hat Demo

Dennis Taylor

>Being a member of the BWWT club and watching the demo, I have to say Doug did a great job, for his first demo, he was well prepared and a pleasure to watch turn. His key phrase was, "I am not a pro", sure could of fooled me. I am sure there will be more demo's in his future, he was enjoyable to watch and very informative, if anyone gets a chance to attend a demo with Doug, your members will not be disappointed!.....GREAT JOB DOUG!....Dennis Taylor

Re: Doug Thompson Hat Demo

#14

I disagree

tek-Brunswick, Ohio

>Not about Doug's Demo, Gordon, you will get to see that again this spring at the North Coast Woodturners meeting. Gordon is a very modest turner. He is by no means a lousy turner. He does some very precise work and makes some good looking turnings. How about posting some of your work Gordon? Then the Wood Central crowd will know what I know. You are a much better than average turner.

Tom

Re: Doug Thompson Hat Demo

#15

Re: I disagree

Gordon Seto

>Tek,

This is not about me. My point is I am fortunate to be members of 2 active Clubs - Northcoast (which you are the President of) and Buckeye. I always have the opportunity to watch more than my share of 1st class demos.

Even though I am not a good cook, but having eat out enough I think I qualify as a restaurant critic.

Back to Doug's demo, I took the core out from his hat home. I turned my first thin wall bowl using what I learned from the demo. I am going to post it later.

Gordon

Re: Doug Thompson Hat Demo

#16

Re: I disagree

tek-Brunswick, Ohio

>I'm only vice president, not president. The club isn't in that much trouble yet. I just don't like to see people with skills selling themselves short. BTW I just scheduled Jimmy Clewes for October in 2008.

Re: Doug Thompson Hat Demo

#17

Bill Blasic

Re: I disagree

Bill Blasic

>Two points, Gordon made barbeque ribs for a gathering I had here in PA and they were superb (So much for not being able to cook)and he had the turning he made from the coring of Doug's hat at the NCWT meeting. It is super thin and must weigh around an ounce. Very well done!