Just a Pimento Burl hollowform
steve antonucci
>This pimento burl came from Kurt K. in Indy. I hollowed it to about 3/16" at the top, but 1/8" through the side walls. The foot might be 3/16" again. It's still wet, and it will move like crazy so this is far from a finished product. (I've turned Madrone that doesn't move as much!)
The first piece I turned needs to be sanded by hand to maintain the wavy texture, but it's my intent to put the two and one other (yet to be turned) into a triptych of pimento hollow vessels. Here's the before picture... after will follow eventually.
Steven



