Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Santos rosewood beaded box....

Posts

Santos rosewood beaded box....

#1

Mike Stafford

Santos rosewood beaded box....

Mike Stafford

>Here is a little beaded box in one of my favorite woods for boxes, Santos rosewood. This wood turns and cuts beautifully, smells great and finishes nicely. In this box I tried to reduce the thickness of the lid around its circumference while retaining the crown in the center of the lid. The tough part is getting the ratio of the diameter of the lid to the diameter of the box body right. This box is 1 3/4" tall and 3" in diameter. I look forward to your comments...


img

Re: Santos rosewood beaded box....

#2

Re: Santos rosewood beaded box....

Tommy Holmes

>Beautiful box. I love the bead in the center. Well executed.

Re: Santos rosewood beaded box....

#3

Re: Santos rosewood beaded box....

Jennifer@Indy.USA

>I wanna learn how to do that!

Beautimous!

Jen :)

Re: Santos rosewood beaded box....

#4

Re: Santos rosewood beaded box....

john lucas

>This one is cute. I like the shape. It almost looks like it's smiling.

Re: Santos rosewood beaded box....

#5

Re: Santos rosewood beaded box....

Terry Quiram, Roanoke Illinois

>Mike

Another winner. I love the shape and the bead is terrific. How long did it take you to turn and finish this box?

Terry

Re: Santos rosewood beaded box....

#6

Excellent!

Ed Moore

>

Re: Santos rosewood beaded box....

#7

Re: Santos rosewood beaded box....

Mike Nelson

>Beautiful box Mike. 'if' I were to change anything it might be the taper of the edge of the lid to mimic the curve of the upper base, if that makes sense. Mike

Re: Santos rosewood beaded box....

#8

Mike Stafford

Re: Santos rosewood beaded box....

Mike Stafford

>Terry, I did not specifically time this box but I would imagine around 2 hours since it does take longer to hollow the inside. I am not the world's fastest turner. The inside of this form takes longer to sand as well. The upper curve of the hollow usually is a little rough and takes longer to sand. It is important to me that every surface be as smooth as possible since I have noticed that box lovers check every surface with their fingers and eyes.

Thank you for your comments.

Re: Santos rosewood beaded box....

#9

Mike Stafford

Re: Santos rosewood beaded box....

Mike Stafford

>Mike, I do understand I think. Your suggestion is to reduce the amount of round on the underside of the lid flange to mirror the curve of the upper swell of the body, right?

That gives me more design ideas. Thanks!

Re: Santos rosewood beaded box....

#10

Mike, are you suggesting ...

Ed Moore

>symmetry about the bead?

Ed

Re: Santos rosewood beaded box....

#11

Re: Santos rosewood beaded box....

john lucas

>I think there are two options there. One is to mimic the curve or the bottom, the other would be to make the curve of both sides look like the ring is a rubber band holding them in. In this case the curves may not be identical but would still flow into each other.

Re: Santos rosewood beaded box....

#12

Mike Stafford

I think that is what Mike was suggesting...

Mike Stafford

>If I interpreted Mike's suggestion I believe he had the idea that I might have the curve on the underside of the lid flange the same as the curve on the upper swell of the body just below the bead.

Re: Santos rosewood beaded box....

#13

Re: Santos rosewood beaded box....

Ed in Sptbg.

>Great work, Mike. In a recent thread, several of you have expressed an interest in box making. Check out books on the subject by Richard Raffan and Chris Stott. Both are excellant.

Re: Santos rosewood beaded box....

#14

Which would make it ...

Ed Moore

>symmetric about the bead. [grin]

Ed

Re: Santos rosewood beaded box....

#15

Mike Stafford

Yes, Ed, you are correct.....

Mike Stafford

>I must have been having a senior moment because the meaning of symmetry escaped me for a moment....Ed, don't use those big words around me and if you do t y p e t h e m s l o w l y......